Instructions
LED 3W Pockit® Spot 12V
Product # LLED3DSPCNI
Swivel Feature
The 3W Pockit® Spot LED's acts as a spotlight that keeps kiosks, displays and prep areas highlighted. It features a narrow 30° light spread, two large springs for recess mounting and the 12° swivel. Exceptionally low profile of only 29 mm (1-1/8") makes it ideal for tight applications.
ADVANTAGES AND BENEFITS
- Average rated life: 50,000 hours.
- Fixture tilts 12° in either direction.
- Focused 30° beam angle.
- Highest output spot light available.
- Strong spring clip for recessing
- All metal construction
- Fixture tilts 12° in either direction.
- Focused 30° beam angle.
- Highest output spot light available.
- Strong spring clip for recessing
- All metal construction
REQUIRED PRODUCTS
Requires ONE of the following products
OR
OR
OR
OR
TECHNICAL SPECIFICATIONS
Product #
LLED3DSPCNI
Lighting Type
LED
Kelvin Color Temperature
Cool White
Light Color
Cool White
Finish
Nickel
Voltage
12 V
Wattage
3 W
Height
1 5/32 in*
Diameter
2 5/16 in
Recess Depth
1 1/8 in
Bore Hole
2 1/8 in
Standards and Certifications
ETL
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
IMPORTANT INFORMATION
- The Pockit® Spot is dimmable.
- IMPORTANT! Make sure to match polarity (+) and (--) of the wires to the AMP® connector. See markings on wires and connector.
- IMPORTANT! Make sure to match polarity (+) and (--) of the wires to the AMP® connector. See markings on wires and connector.
DISCLAIMER
- All product dimensions and specifications are subject to change without prior notice.
- LED is not replaceable.
- Not intended to be used in damp locations or outdoor areas.
This light is intended to be used as a cabinet light on wood, particle board or other structurally sound, heat resistant surface. Care should be taken during and after installation to avoid contact of light with wiring, cord, or any combustible material.
- LED is not replaceable.
- Not intended to be used in damp locations or outdoor areas.
This light is intended to be used as a cabinet light on wood, particle board or other structurally sound, heat resistant surface. Care should be taken during and after installation to avoid contact of light with wiring, cord, or any combustible material.