Line art
Zinc-Plated Wood Screw, Fillister Head, Quadrex Drive, Regular Thread, Type 17 Point
To add to cart, choose from the options below.
Zinc plated pocket screw
Pocket-hole joinery, or pocket-screw joinery, involves drilling a hole at an angle -usually 15 degrees- into one workpiece, and then joining it to a second workpiece with a special screw. Clamping is not required, glue is not necessary but recommended.
The type 17 point eliminates pre-drilling. It also prevents the wood from cracking and splitting!
The type 17 point eliminates pre-drilling. It also prevents the wood from cracking and splitting!
| Product # | Length | Threading | Packaging format |
|---|---|---|---|
| FFQW17Z634KGC1 | 19.1 mm* | Full thread | Box of 100 |
| FFQW17Z634KGC5 | 19.1 mm* | Full thread | Box of 500 |
| FFQW17Z61KGC1 | 25.4 mm* | Partial thread | Box of 100 |
| FFQW17Z61KGC5 | 25.4 mm* | Partial thread | Box of 500 |
| FFQW17Z61KG | 25.4 mm* | Partial thread | Box of 5000 |
| FFQW17Z6114KGC1 | 31.8 mm* | Partial thread | Box of 100 |
| FFQW17Z6114KGC5 | 31.8 mm* | Partial thread | Box of 500 |
| FFQW17Z6114KG | 31.8 mm* | Partial thread | Box of 5000 |
| FFQW17Z6112KGC1 | 38.1 mm* | Partial thread | Box of 100 |
| FFQW17Z6112KGC5 | 38.1 mm* | Partial thread | Box of 500 |
| FFQW17Z6112KG | 38.1 mm* | Partial thread | Box of 5000 |
ADVANTAGES AND BENEFITS
THE PARTIALLY THREADED DESIGN OF RICHELIEU'S POCKET-HOLE JOINERY SCREWS HELPS ASSEMBLE WOOD PIECES.
TECHNICAL SPECIFICATIONS
Head Type
Fillister
Drive required
Quadrex
Screw Size
6
Thread Type
Regular Twin Lead Thread
Point Type
Type 17
Finish
Zinc
Function
Pocket screw
Brand
Reliable
Head Size
no. 6
Drive Size
#2 (Red)
Specific Application
Pocket Hole Screws
Type of Wood
Hardwood
Standards and Certifications
Not Certified
Material
Steel
Thread Count (Pitch/TPI)
18
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
