CD 30 CX Multi-Applicable Sliding Door System for Cabinets

Product #: WEBKIT1216165

Description

Multiple doors, for inset and full overlay applications can be installed.

The CD 30 CX is a sliding system for one or more doors weighing up to 30 kg (66 lbs) each for inset and full overlay applications. The upper guide gear and lower running wheels travel on a recessed mounted tracks. The advantage is that no special cabinet construction is required making it ideal for retro-fitting to existing or standard cabinets.

REQUIRED PRODUCTS

Requires ONE of the following products

Length of 2 linear meter
OR
Length of 3 linear meter

TECHNICAL SPECIFICATIONS

Product number
WEBKIT1216165
Detailed Door Operation
Straight Sliding - Single Sliding
Door Material
Wood
Door Position
Inside Frame
Track Mounting
Surface - Inside the Cabinet, Recessed - Inside the Cabinet
Door Mounting Method
Screw
Roller Position
Lower
Door Thickness
5/8 to 1 3/16 in*
Door Width
39 3/8 in*
Track Material
Anodized Aluminum
Weight Capacity per Door
66.1 lb*
Roller Type
Ball Bearing
Track Length
78 3/4 to 118 in*
Door Height
78 3/4 in*
Material
Plastic
Brand
Ducasse
Door Operation
Straight Sliding
Finish/Color
Gray
Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

ADVANTAGES AND BENEFITS

- For wooden or aluminum-framed doors.
- With CX inlay/recessed tracks, two tracks can be installed for two bypass overlapping doors.
- Allows the installation of stacking doors.
- Surface mount tracks available, see suggested products

IMPORTANT INFORMATION

Note:
Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice!
All technical drawings and documents contain examples for the assembly of different supplier hardware. The customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project.
At any time the execution and installation must be done by qualified persons.
Never exceed the maximum weight or the maximum dimension recommended by the manufacturer.
Always make sure to fix properly the product using the right fixation for the proper material.
Never use any spray lubricant on these products.
Always use a dry cloth to remove debris / dust / residues (sawdust and / or aluminum) from rails before installing hangers.

INCLUDED PRODUCT(S)

- 2 upper guide wheels
- 2 lower running wheels
- 2 stoppers (fits inside lower track)
- Set of wood screws to mount upper guide and lower running wheels

DISCLAIMER

The preceding information as well as any technical recommendation given in writing, verbally or based on tests are provided to the best of our knowledge. However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
CD 30 CX Multi-Applicable Sliding Door System for Cabinets

Product number: WEBKIT1216165