EKU-CLIPO 16 H IS By-Passing Sliding System for 2 Cabinet Doors Inset

Product #: WEBKIT1213377


EKU -CLIPO Option: Invisible soft-closing mechanism

The EKU CLIPO 16 H IS is a top running sliding system for two wooden doors weighing up to 35 lb (16 kg) each, for inslide/inlay applications. The running gear is clipped into a 35 mm diameter housing in the back of the door and the door can be adjusted with the finger-operated adjustment wheel. There are different top track options for single and double track applications that can be recessed or surface mounted to cabinet top. An optional soft close mechanism (sold separately) is available for inside the track. The bottom of the cabinet does not require a lower guide track in the base.


Requires ONE of the following products

Length of 2.5 linear meter
Length of 3.5 linear meter
Length of 3.5 linear meter
Length of 2.5 linear meter


Product number
Displayed in These Showrooms
Detailed Door Operation
Straight Sliding - Bypassing
Door Material
Door Position
Track Mounting
Recessed - Inside the Cabinet
Door Mounting Method
Roller Position
Door Thickness
5/8 to 3/4 in*
Door Width
Max. 39 3/8 in*
Track Material
Track Finish
Satin Aluminum
Number of Doors
Weight Capacity per Door
0 to 564 oz*
Roller Type
Axle (Bushing)
Track Length
98 3/8 in*
Door Height
Max. 55 1/8 in*
Door Operation
Straight Sliding

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.


  • Adjustment Tools and Accessories for Sliding Door Systems
  • Running and Guiding Tracks for Sliding Door Systems
  • Soft-Close Mechanisms for Sliding Door Systems


- High-tech, invisible soft closing system integrated in the running track.
- Easy door installation, with a tool-free clip-on system and height adjustment.
- More closing convenience: doors close softly and are pulled into the final position.
- Central stopper prevents doors from crossing.


House, dining room, bedroom, private office, sideboards, kitchen cabinets (top and bottom), bathroom furniture.


EKU-CLIPO pictures are provided for visual reference only: actual product may vary.

All required hardware should be ordered and obtained prior before to initiating fabrication or installation work. Please verify that the parts and quantity listed in your order are correct before proceeding to checkout.

Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.

The documentation, drawings and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.

Installation of the Product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge and experience. Richelieu expressively disclaims any liabilities for results obtained through improper use or installation.

Always remove debris / dust / residues (sawdust and / or aluminum) from the rails using a dry cloth before installing carriages bearing.

Never spray lubricant.


By accessing or referring to this document, or by using any of Richelieu's websites, you accept all applicable terms as they apply from time to time. This legal disclaimer is in no way limited or altered by any other terms or conditions. Richelieu may change said terms at its discretion and without prior notice. A version of the most current terms will always be available on Richelieu's website. The preceding information and technical documentation, information or recommendation issued by Richelieu verbally or in writing is believed to be accurate and is given in good faith, but no representation of warranty as to its completeness or accuracy is made. Suggestions for uses or applications are only opinions. Users are responsible for determining the suitability of these products for their own particular purpose. No representation of warranty, expressed or implied, is made with respect to information or products including, without limitation, warranties or merchantability, fitness for particular purpose, non-infringement of any third party patent or other intellectual property rights including, without limit, copyright, trademark and designs. Any trademarks identified herein are trademarks of the Richelieu group of companies. Richelieu assumes no risk and shall not be subject to any liability for damages or loss resulting from the specific use or application made of the product. Richelieu's liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party relating to the product shall not exceed the price paid for said products. In no event shall Richelieu be liable for any special, incidental, or consequential damages (including loss of use, loss of profit, and claims of third parties) however caused, whether by the negligence of Richelieu or otherwise. Products returned for warranty purposes shall be subject to Richelieu's then applicable Return Policy.
EKU-CLIPO 16 H IS By-Passing Sliding System for 2 Cabinet Doors Inset

Product number: WEBKIT1213377