EKU CLIPO 36 HM IS By-Pass Sliding System for 2 Cabinet Doors Inset

Product #: WEBKIT1214587


Optional hidden soft-closing mechanism

EKU CLIPO 36 HM IS is a top running sliding system for two wooden doors weighing up to 79 lbs (36 kg) each, for inslide/inlay applications. The running gear is mortised/rebated into the top of the door. There are different top track options for single and double track applications that can be recessed or surface mounted to cabinet top. An optional soft close mechanism (sold separately) is available for inside the track. A unique spring loaded lower guide wheel and guide rail insert system adjusts to the contour of the cabinet floor as the door travels across the cabinet face.


Requires ONE of the following products

Length of 2.5 linear meter
Length of 3.5 linear meter
Length of 2.5 linear meter
Length of 3.5 linear meter
Length of 2.5 linear meter


Product number
Detailed Door Operation
Straight Sliding - Bypassing
Door Material
Track Mounting
Surface - Inside the Cabinet, Recessed - Inside the Cabinet
Door Mounting Method
Recessed, Concealed
Roller Position
Door Thickness
3/4 to 31/32 in*
Door Width
Max. 39 3/8 in*
Number of Doors
Weight Capacity per Door
79.4 lb*
Roller Type
Axle (Bushing)
Door Height
Max. 94 1/2 in*
Track Type
Single Track
Door Operation
Straight Sliding

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.


  • Adjustment Tools and Accessories for Sliding Door Systems
  • Recessed and Flush Cup Pulls for Sliding Doors


Pictures provided for visual reference only: actual product may vary.

All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantity listed in your order are correct before proceeding to checkout.

Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.

The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.

Installation of the Product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressively disclaims any liabilities for results obtained through improper use or installation.

Always remove debris/dust/residues (sawdust and/or aluminum) from the rails using a dry cloth before installing carriage bearings.

Never spray lubricant.


- Optional closing mechanism.
- Invisible hardware.


Private living, eating, and sleeping areas, private and public office areas, sideboards, wall cabinets and base units in kitchens, base units in bathrooms.



By accessing or referring to this document, or by using any of Richelieu's websites, you accept all applicable terms as they apply from time to time. This legal disclaimer is in no way limited or altered by any other terms or conditions. Richelieu may change said terms at its discretion and without prior notice. A version of the most current terms will always be available on Richelieu's website. The preceding information and technical documentation, information, or recommendations issued by Richelieu verbally or in writing are believed to be accurate and are given in good faith, but no representation of warranty as to their completeness or accuracy is made. Suggestions for use or application are only opinions. Users are responsible for determining the suitability of these products for their own particular purpose. No representation of warranty, expressed or implied, is made with respect to information or products including, without limitation, warranties or merchantability, fitness for particular purpose, non-infringement of any third party patent or other intellectual property rights including, without limit, copyright, trademark, and designs. Any trademarks identified herein are trademarks of the Richelieu group of companies. Richelieu assumes no risk and shall not be subject to any liability for damages or loss resulting from the specific use or application made of the product. Richelieu's liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party relating to the product shall not exceed the price paid for said products. In no event shall Richelieu be liable for any special, incidental, or consequential damages (including loss of use, loss of profit, and claims of third parties) however caused, whether by the negligence of Richelieu or otherwise. Products returned for warranty purposes shall be subject to Richelieu's then applicable Return Policy.
EKU CLIPO 36 HM IS By-Pass Sliding System for 2 Cabinet Doors Inset

Product number: WEBKIT1214587