CF-115 Bifolding System

For heavy use

The CF-115 Bifolding System is a heavy-duty folding door hardware system for heavy and thick bi-fold doors that are frequently used. The pivot hanger has four ball bearing wheels with nylon wheels for smooth and durable performance.

Product # KNCF115

REQUIRED PRODUCTS

Requires ONE of the following products

Per unit
OR
Length
OR
Length

TECHNICAL SPECIFICATIONS

Product number KNCF115
Brand K.N. Crowder
Door Material Wood
Track Mounting Ceiling Mount
Door Mounting Method Screw
Roller Position Upper
Door Thickness 1 3/8 to 1 3/4 in
Track Material Aluminum
Track Finish Mill Finish
Number of Doors 1
Weight Capacity per Door Max. 100 lb
Roller Type Ball Bearing
Track Length 36 to 96 in
Function Folding
Adjustable Yes

ADVANTAGES AND BENEFITS

The hardware kit KNCF115 is especially designed for 1 door with 2 panels/leaves, weighing a maximum of 50 lb. per panel for a total of 100 lb.

IMPORTANT INFORMATION

Please note:
This illustration is provided for visual reference only. Actual product may differ from the illustration.
Order hardware before starting the job.
Always use the instructions inside the package.
The manufacturer reserves the right to change product and information without notice.
Drawings and technical documents contain examples of hardware from different manufacturers.
The customer may in no case make a claim following the use of these documents.
The Company disclaims any responsibility for the structural details related to a construction or project.
Installation must be done by qualified personnel.
Always make sure that the product is properly installed using suitable fixings to the support material.
Never exceed the load or maximum size recommended by the manufacturer.
Never use a spray lubricant on this product.
Always use a soft cloth to remove debris/dust/residue (sawdust or aluminum residue) from the rails before installing the hangers.

DISCLAIMER

Note: Picture for visual reference only: actual product may vary from that shown in photo. Be sure to order hardware before beginning fabrication or installation work. Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes, modify quite produced or information without prior notice! All technical and drawings documents contain examples for the assembly of different supplier hardware. The customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project. At any time the execution and installation must be done by qualified persons. Never exceed the maximum weight or the maximum dimension recommended by the manufacturer. Always make sure to fix properly the product using the right fixation for the proper material. Never use any spray lubricant on these products. Disclaimer: The preceding information as well as any technical recommendation given in writing, verbally or based on tests are provided to the best of our knowledge. However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are affected according to our most updated General Sales and Delivery Conditions. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
CF-115 Bifolding System

Product number: KNCF115

Set