Bottom of door not fixed
Each group is hinged to its frame, ensuring perfectly controlled operation.
Characteristics of the door leaves:
NK PAR. 15:
- Maximum weight: 15 kg (per mechanism, one door with two panels)
- Maximum dimensions: 45 cm x 195 cm
Sliding panels are guided by an aluminum track and suspended from an NK roller located at the end of each group. The door leaves hinged to the frame move with European box hinges featuring triple adjustment. The joint between door leaves is constructed with special intermediate Klein hinges, and it is the hinges themselves that maintain the separation of and alignment between the leaves.
Requires ONE of the following products
Length of 2 linear meter
Length of 3 linear meter
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
Top TrackProduct number 8012010Track Length: 78 3/4 in*Length of 2 linear meter
Top TrackProduct number 8012005Track Length: 9 ft 10 in*Length of 3 linear meter
Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes, modify quite produced or information without prior notice.
All technical drawings and documents contain examples for the assembly of different supplier's hardware. The customer cannot make any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project.
At all times, execution and installation must be done by qualified persons.
Always make sure to install the product carefully using the appropriate fixation for your material.
Never exceed the maximum weight or the maximum dimensions recommended by the manufacturer.
Never use any spray lubricant on these products.
Use a dry cloth to remove fragments, dust, and residue (sawdust and/or aluminum) from rails before the installation of the hangers.