TWIN TELESCOPIC VD. Synchronized Telescopic Sliding System for Two Glass Doors

Synchronized Telescopic sliding door system for glass

The DUCASSE TWIN TELESCOPIC VD is a top hung synchronized sliding system for telescopic two glass door panels weighing up to 176 lbs (80 kg) each. This is an economical sliding solution for 3/8" (8 to 10 mm) thick glass. The basic design of the compression clamps make it easy to install.

Product # 8910300001401


Requires the following products

Bag of 4 units
Length of 2 linear meter

Requires ONE of the following products

Length of 12 linear foot
Length of 12 linear foot
Length of 2 linear meter
Length of 3 linear meter


Product number 8910300001401
Track Mounting Ceiling Mount
Function Movable Wall
Door Material Glass
Weight Capacity per Door Max. 176 lb
Finish/Color Satin Aluminum (VC)
Number of Doors 2
Door Height 94 1/2 in*
Door Mounting Method Compression Clamp
Roller Type Ball Bearing
Roller Position Upper
Door Width 48 in*
Door Thickness 5/16 to 13/32 in*
Track Material Anodized Aluminum
Track Finish Satin Aluminum
Track Length 12 ft
Brand Ducasse

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.


- With one single movement you open both doors simultaneously in the same direction.
- Adjustable overlay area.
- Ideal for partitioning the interior of a room.
- Two sets can be installed, one at each end of the opening, to cover a maximum distance of 5.6 m (18.4').
- Uses compression clamps: no need to bore the glass.
- Quick and easy installation and adjustment.


Residential, commercial, and institutional room division.


- Perforated glass clamps are recommended for glass over 50 kg and in high-humidity conditions, e.g. shower cabins.
- The use of tempered glass is recommended.
- Allow for door handle drilling.

Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice.
All technical drawings and documents contain examples of the assembly of different supplier's hardware. The customer cannot base any claims on the use of these documents. No responsibility is assumed for design details relating to a particular construction project.
At all times, execution and installation must be undertaken by qualified persons.
Always be sure to install the product correctly using the right fasteners for your materials.
Never exceed the maximum weight or the maximum dimensions recommended by the manufacturer.
Never use any spray lubricant on these products.
Use a dry cloth to remove fragments, dust, and residue (sawdust and/or aluminum) from rails before the installation of the hangers.


The preceding information, as well as any technical recommendations given in writing, verbally or based on tests, is provided to the best of our knowledge. However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions.
TWIN TELESCOPIC VD. Synchronized Telescopic Sliding System for Two Glass Doors

Product number: 8910300001401