Richelieu 2017 CCRM US
TWIN TELESCOPIC WOOD. Synchronized Telescopic Sliding System for Two Wood Doors
Synchronized Telescopic sliding door system for wood
The DUCASSE TWIN TELESCOPIC WOOD is a top hung synchronized sliding system to telescopic two wood door panels weighing up to 176 lbs (80 KG) each. This is an economical sliding solution for 1" to 1 3/8" (25 to 35 mm) wooden door panels.
- Required products
- Technical specifications
- Suggested products
- Related documents
- Advantages and benefits
- Important Information
Requires ONE of the following products
Length of 12 linear foot
Length of 2 linear meter
Length of 3 linear meter
Length of 12 linear foot
|Track Mounting||Ceiling Mount|
|Weight Capacity per Door||Max. 176 lb|
|Number of Doors||2|
|Door Mounting Method||Screw|
|Roller Type||Ball Bearing|
|Door Thickness||31/32 to 1 3/8 in*|
|Track Material||Anodized Aluminum|
|Track Finish||Satin Aluminum|
|Track Length||12 ft|
|Displayed in These Showrooms||Montreal, Ottawa, Toronto, Mississauga|
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
U21 66 Aluminum Snap-on FasciaProduct number 89041U2166210Length: 78 3/4 in*Length of 2 linear meter
U21 66 Aluminum Snap-on FasciaProduct number 89041U2166310Length: 9 ft 10 in*Length of 3 linear meter
- Overlaying area between the doors is adjustable.
- Installation and regulation can be done from one side if needed (no need to have access to both sides of the opening).
- Telescopic guide with roller to reduce friction between the doors.
- Closes softly and securely thanks to bumper.
- For wood or aluminum door frames.
- Double Track available for faster and easier installation.
Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes, modify quite produced or information without prior notice!
All technical and drawings documents contain examples for the assembly of different supplier hardware. The customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project.
At any time the execution and installation must be done by qualified persons.
Never exceed the maximum weight or the maximum dimension recommended by the manufacturer.
Always make sure to fix properly the product using the right fixation for the proper material.
Never use any spray lubricant on these products.