EKU PORTA 100 GW. Low Profile Concealed Sliding System
Concealed Clamping Shoe System for Frameless Glass Doors
The EKU PORTA 100 GW is a top mount sliding system for frameless glass doors weighing up to 220 lbs (100 kg). The unique clamping/running gear system is concealed inside the upper track for a minimal low profile design to give the appearance that the glass is truly floating and frameless. The clamping shoes supports the glass without the need to drill glass and no adhesive required (dry glazing). Optional integrated soft close mechanism is available. Quick and simple to install.
- Included in this webkit
- Required products
- Technical specifications
- Suggested products
- Related documents
- Advantages and benefits
- Important Information
INCLUDED IN THIS WEBKIT
Requires the following products
Length of 2.5 linear meter
Bag of 20 units
Length of 2.5 linear meter
|Track Mounting||On Ceiling Surface, Recessed - Inside Ceiling|
|Type of Door||Glass|
|Weight Capacity per Door||220 lb*|
|Number of Doors||1|
|Maximum Door Height||8 ft 10 in*|
|Door Mounting Method||Compression Clamp|
|Roller Type||Ball Bearing|
|Door Position||In Front of Wall|
|Door Thickness||5/16 to 1/2 in*|
|Door Width||48 in*|
|Rail Length||98 3/8 in*|
|Rail Material||Anodized Aluminum|
|Rail Finish||Satin Aluminum|
|Soft-Close Mechanism||Available, Sold Separately|
|Soft-Close Type||One-Way Operation, Optional Integrated Soft Close|
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
- With integrated fixed-glass profile for fixed-glass solutions
- Running gear fully concealed in the track
- Continuous bottom guide adjustment for different glass thicknesses
- Adjustable stopping force
- Private living areas
- Private and public office areas
- Individualized interior design
Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice.
All technical drawings and documents contain examples of the assembly of different suppliers' hardware. The customer cannot base any claims on the use of these documents. No responsibility is assumed for design details relating to a particular construction project.
At all times, execution and installation must be undertaken by qualified persons.
Never exceed the maximum weight or the maximum dimensions recommended by the manufacturer.
Always be sure to install the product correctly using the right fasteners for your materials.
Never use any spray lubricant on these products.