EKU PORTA 100 G - Sliding Door Wall or Ceiling Mount Installation

Product #: WEBKIT1213681

Description

EKU Porta 100 G - Flexible track mounting for wall or ceiling mounting

The Eku Porta 100 G is a top hung sliding system for frameless glass door panels weighing up to 220 lbs (100 kg) each. The glass is held at the top by two clamp shoes without the need to drill glass and no adhesive required (dry glazing). The "Combi-Track" can be mounted to the wall or ceiling. The tool-less clip-on aluminium fascia panel is quick and simple to install.

REQUIRED PRODUCTS

Requires the following products

Box

Requires ONE of the following products

Length of 3.5 linear meter
OR
Length of 2.5 linear meter

Requires ONE of the following products

Length of 3.5 linear meter
OR
Length of 2.5 linear meter

TECHNICAL SPECIFICATIONS

Product number
WEBKIT1213681
Track Mounting
Ceiling Mount, Wall Mount
Door Operation
Straight Sliding
Door Material
Glass
Weight Capacity per Door
220 lb*
Number of Doors
1
Door Height
8 ft 10 in*
Door Mounting Method
Compression Clamp
Roller Type
Ball Bearing
Roller Position
Upper
Door Thickness
5/16 to 1/2 in*
Door Width
63 in*
Soft-Closing
Yes
Soft-Close Type
One-Way Operation
Detailed Door Operation
Straight Sliding - Single Sliding
Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

ADVANTAGES AND BENEFITS

- Minimal installation height
- Glass mounts with well-tested clamp technology - NO adhesive required
- For wall and ceiling mounting
- Running gear concealed behind tool-less clip-on fascia
- Quiet and smooth high-quality performance

APPLICATION

- All-glass/frameless doors
- Private living areas
- Public and office areas
- Projects
- Personalized interior design

IMPORTANT INFORMATION

Note: For the EKU Porta 100G soft closing in both directions, add the following products to your order: 893102071 and 89311407. The center-to-center distance between rollers should be 570 mm.
Note:
Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice.
All technical drawings and documents contain examples of the assembly of different suppliers' hardware. The customer cannot base any claims on the use of these documents. No responsibility is assumed for design details relating to a particular construction project.
At all times, execution and installation must be undertaken by qualified persons. Always be sure to install the product correctly using the right fasteners for your materials.
Never exceed the maximum weight or the maximum dimensions recommended by the manufacturer.
Never use any spray lubricant on these products.
Always use a dry cloth to remove debris/dust/residues (sawdust and/or aluminum) from rails before installing.

DISCLAIMER

The preceding information, as well as any technical recommendations given in writing, verbally or based on tests, is provided to the best of our knowledge. However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes.The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
EKU PORTA 100 G - Sliding Door Wall or Ceiling Mount Installation

Product number: WEBKIT1213681