HAWA JUNIOR 120/A with Two Track Stoppers. Sliding System for Wood Doors
For low-headroom applications
The HAWA Junior 120/A sliding system is for wood doors weighing 120 kg (265 lbs.) each. The suspension bracket is top mount to the top of the door with a slot for easy installation. The hardware set includes two track stoppers for inside the track with adjustable retaining arm to hold the door when open or close. The retaining arm can be adjusted to minimize the pull force to zero for when you move the door.
- Technical specifications
- Suggested products
- Advantages and benefits
- Important Information
|Type of Door||Wood|
|Weight Capacity per Door||265 lb*|
|Door Mounting Method||Support for Surface Mounting|
|Rail Length||98 3/8 to 157 in*|
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
- Mortice Locks, Latches and Striker Plates for Sliding Doors
- Handle and Lock Accessories for Sliding Doors
- Dust-Proof Keeper
- Sliding Door Profiles
- Floor Door Closers for Sliding Door
- Simple to install
- Secure suspension bracket
- Quiet action
- Track stop with adjustable retaining force
Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice.
All technical drawings and documents contain examples for the assembly of different suppliers' hardware. The customer cannot make any claims based on the use of these documents. No responsibility is assumed for design details relating to a construction or project.
At all times, execution and installation must be undertaken by qualified persons.
Never exceed the maximum weight or the maximum dimensions recommended by the manufacturer.
Always be sure to install the product correctly using the appropriate fixation for your material.
Use a dry cloth to remove fragments, dust, and residue (wood and/or aluminum sawdust) from rails before the installation of the hangers.
Never use any spray lubricant on these products.