HAWA JUNIOR 40/B with Two Track Stoppers. Sliding System for Wood Doors
For low-headroom applications
The HAWA Junior 40/B sliding system is for wood doors weighing 40 kg (88 lbs) each. The suspension bracket is mortised/rebated into the top of the door for a concealed low profile appearance. The hardware set includes two track stoppers for inside the track with an adjustable retaining arm to hold the door when open or closed. The retaining arm can be adjusted to minimize the pull force to zero when moving the door.
- Included in this webkit
- Required products
- Technical specifications
- Suggested products
- Advantages and benefits
- Important Information
- Related documents
INCLUDED IN THIS WEBKIT
Length of 1.3 linear meter
Requires ONE of the following products
Length of 2 linear meter
Length of 4 linear meter
|Track Mounting||On Ceiling Surface, Recessed - Inside Ceiling|
|Type of Door||Wood|
|Weight Capacity per Door||88.2 lb*|
|Number of Doors||1|
|Maximum Door Height||10 ft*|
|Door Mounting Method||Mortised/Rebate|
|Door Thickness||1 3/8 to 1 25/32 in*|
|Rail Type||Single Rail|
|Rail Length||78 3/4 to 157 in*|
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
- Sliding Door Guides
- Sliding Door Soft-Close Mechanisms
- Sliding Door Stoppers
- Carrier profile suspension
- Minimal installation height
- Quiet action
- Track stop with adjustable retaining force
Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice.
All technical drawings and documents contain examples for the assembly of different suppliers' hardware. The customer cannot make any claims based on the use of these documents. No responsibility is assumed for design details relating to a construction or project.
At all times, execution and installation must be undertaken by qualified persons.
Never exceed the maximum weight or the maximum dimensions recommended by the manufacturer.
Always be sure to install the product correctly using the appropriate fixation for your material.
Use a dry cloth to remove fragments, dust, and residue (wood and/or aluminum sawdust) from rails before the installation of the hangers.
Never use any spray lubricant on these products.