K 30

Product #: WEBKIT10039
Number of Doors: 2 Door Thickness: 7/8 to 1 3/8 in* Track Material: Anodized Aluminum Track Finish: Satin Aluminum Detailed Door Operation: Straight Sliding - Bypassing Modify Options
Product number Number of Doors Door Thickness Track Material Track Finish Detailed Door Operation
WEBKIT10039 2 7/8 to 1 3/8 in* Anodized Aluminum Satin Aluminum Straight Sliding - Bypassing
WEBKIT10038 1 5/8 to 1 3/8 in* Steel Galvanized Straight Sliding - Single Sliding

Description

Reversible wheel set

The K.30 sets permit the installation of sliding closet doors of up to 30 kg,

- The system's polyamide-injected wheels, featuring a friction axle with lifetime lubrication in an FBB wheel set in the case of the K.30, and its double guides in extruded aluminum give the product its key characteristic: smooth and silent action.

- This product is designed for easy installation. Once the guide has been installed and the sets have been installed on the doors, connecting the doors to the guide takes a matter of seconds.

INCLUDED IN THIS WEBKIT

Bag
 
Length of 2 linear meter
 

TECHNICAL SPECIFICATIONS

Product number
WEBKIT10039
Track Mounting
Ceiling Mount
Door Operation
Straight Sliding
Door Material
Wood
Weight Capacity per Door
39.7 to 66.1 lb*
Door Installation
Top Hung
Door Mounting Method
Screw
Roller Type
Ball Bearing
Roller Position
Upper
Door Position
Inset/Inlay
Track Length
78 3/4 in*
Soft-Closing
No
Brand
Klein
Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

RELATED DOCUMENTS

ADVANTAGES AND BENEFITS

- The base where the wheel set is housed is reversible, allowing a leaf thickness of up to 22 mm in one position and a thickness of up to 35 mm in the opposite position. Once the door leaf is in place, final height adjustment can be made.

INCLUDED PRODUCT(S)

- Four single roller carriers
- Two floor guides
- Assembly screws

IMPORTANT INFORMATION

Note:
Picture for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes, modify quite produced or information without prior notice!
All technical and drawings documents contain examples for the assembly of different supplier hardware. The customer cannot derive any claims from the use of these documents. No responsibility is assumed for design details relating to the construction or project.
At any time the execution and installation must be done by qualified persons.
Never exceed the maximum weight or the maximum dimension recommended by the manufacturer.
Always make sure to fix properly the product using the right fixation for the proper material.
Never use any spray lubricant on these products.

DISCLAIMER

The preceding information as well as any technical recommendation given in writing, verbally or based on tests are provided to the best of our knowledge. However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are affected according to our most updated General Sales and Delivery Conditions. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
K 30

Product number: WEBKIT10039