Decorative Rail Systems
Traditional - Decorative Concealed Rail System
Interior Barn Door
The Traditional is a wall mount sliding door hardware kit for one door weighing up to 80 kg (176 lb) each. The hardware kit includes sliding systems with smooth running ball bearing wheels, two soft-close mechanisms, 2.0 meter (78") upper track and a clip-on wood fascia to conceal the track and hardware. Simple to install with sturdy wall blocks/spacers for the track designed to accommodate door thicknesses from 35 to 45 mm (1-3/8" to 1-3/4"). The system is intended for residential light duty use only.
- Technical specifications
- Suggested products
- Advantages and benefits
- Included Product(s)
- Important Information
- Related documents
|Track Mounting||Wall Front|
|Type of Door||Wood|
|Weight Capacity per Door||33.1 to 88.2 lb*|
|Finish/Color||Mill Finish (M)|
|Groove Width at the Bottom of Door||3/16 to 9/32 in*|
|Groove Needed for Guiding System||Yes|
|Groove Depth||25/32 in*|
|Number of Doors||1|
|Door Mounting Method||Screw|
|Roller Type||Ball Bearing|
|Door Position||In Front of Wall|
|Door Thickness||1 3/8 to 1 3/4 in|
|Door Width||24 to 36 in|
|Rail Length||78 3/4 in*|
|Rail Material||Anodized Aluminum|
|Rail Finish||Satin Aluminum|
|Soft-Close Type||Both Ends Operation|
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
- Door Retainer
- Onw.barn door
- Tenderized Veneers - CEDAN Real Wood
- Ball bearings for easy movement.
- Mounting rail pre-drilled every 450 mm (17-23/32") for wall installation.
- Rail can be cut using proper tools (e.g. miter saw with blade for nonferrous metals). It's important to note that each end must be cut in equal parts to maintain the layout of the drilled rail.
- 3 mounting pieces for the finishing band
- 1 two-meter MDF finishing band
- 2 MDF end caps
- 2 carriages with 4 wheels and mounting plate
- 2 soft-close mechanisms
- 1 guide
Remove the frame moldings or install a piece of wood (not included) of the same thickness and length before setting the new hardware in place to ensure the release of the door. Always make sure that the product is properly attached or installed using appropriate fixings material. An additional anchor may be required for installation (sold separately).
Note: This illustration is provided for visual reference only. Actual product may vary. Order hardware before starting the job. The manufacturer reserves the right to change product and information without notice. Always follow the instructions inside the package.
Drawings and technical documents contain examples of hardware from different manufacturers. The customer may not in any case make a claim following the use of these documents. The Company disclaims any responsibility for the structural details related to a construction or project.
Installation must always be done by qualified personnel. Make sure that the product is properly installed using suitable fixtures on the support material. Never exceed the maximum load or size recommended by the manufacturer.
Never use a spray lubricant on this product. Always use a dry cloth to remove debris, dust and residues (sawdust and/or aluminum dust) from rails before installing hangers.