Installation
KN400 Pocket Door Set
Product # KN400
Length
Can be cut to size
The KN400 Pocket Door Set is designed for one wood door weighing up to 150 lb (68 kg).
Features:
- Type C pocket frame and C-411 Q hardware set
- For 2 x 4 wall construction
- Height adjustable device
- Self-supporting structural header track supported by brackets at each end
- Roll formed steel uprights for pocket frame
- Can be cut to size
- Floor mounted guide, no groove required for bottom of door
- Bottom guide channel optional (sold separately)
Features:
- Type C pocket frame and C-411 Q hardware set
- For 2 x 4 wall construction
- Height adjustable device
- Self-supporting structural header track supported by brackets at each end
- Roll formed steel uprights for pocket frame
- Can be cut to size
- Floor mounted guide, no groove required for bottom of door
- Bottom guide channel optional (sold separately)
TECHNICAL SPECIFICATIONS
Product #
KN400
Door Movement
Pocket Door
Detailed Door Movement
Pocket door
Door Position
Concealed Inside Wall
Roller Position
Upper
Door Installation
Top Hung
Soft-Close Direction
N/A
Running Track Fixing
Bracket
Stopper
Two
Packaging Format
Box
Compatible with
C-411
Finish
Mill Finish
Load Capacity
150 lb
Manufacturing Material
Aluminum
Roller Type
Ball Bearing
Product type
Hardware Set
Door Material
Wood
Number of Doors
1
Maximum Door Width
18 to 36 in
Track type
Box Track
Door Thickness
1 3/8 to 1 3/4 in
Door Height
80 to 84 in
Soft-Closing
No
Overall Length
71 7/8 in
Brand
K.N. Crowder
Application
Pocket Door
SUGGESTED PRODUCTS
- Running and Guiding Tracks for Sliding Door Systems
- Sliding Solutions for Architectural Applications
- Door Guides for Sliding Door Systems
-
Recessed Bottom Guiding Track C-201
Product # KNC201144Overall Length: 12 ftLength of 12 linear foot -
INCLUDED PRODUCT(S)
- 1 header track
- 2 C-411 hangers
- 2 top plates
- 2 spinwheels
- 2 C-411 T-bolts
- 2 stops
- 2 floor guides for 1 3/8 in (34.92 mm) door
- 2 floor guides for 1 3/4 in (44.45 mm) door
- 2 header brackets for track
- 2 floor brackets
- 4 steel uprights
- 1 MDF board 1 in (25.4 mm) x 3 in (76.2 mm) x 72 in (1828.8 mm)
- 2 rubber bumpers
- Screws and fasteners for individual components only
- 2 C-411 hangers
- 2 top plates
- 2 spinwheels
- 2 C-411 T-bolts
- 2 stops
- 2 floor guides for 1 3/8 in (34.92 mm) door
- 2 floor guides for 1 3/4 in (44.45 mm) door
- 2 header brackets for track
- 2 floor brackets
- 4 steel uprights
- 1 MDF board 1 in (25.4 mm) x 3 in (76.2 mm) x 72 in (1828.8 mm)
- 2 rubber bumpers
- Screws and fasteners for individual components only
DISCLAIMER
By accessing or referring to this document, or by using any of Richelieu's websites, you accept all applicable terms as they apply from time to time. This legal disclaimer is in no way limited or altered by any other terms or conditions. Richelieu may change said terms at its discretion and without prior notice. A version of the most current terms will always be available on Richelieu's website.
The preceding information and technical documentation, information or recommendations issued by Richelieu verbally or in writing is believed to be accurate and is given in good faith, but no representation of warranty as to its completeness or accuracy is made. Suggestions for use or application are only opinions. Users are responsible for determining the suitability of these products for their own particular purpose. No representation of warranty, expressed or implied, is made with respect to information or products including, without limitation, warranties or merchantability, fitness for particular purpose, non-infringement of any third party patent or other intellectual property rights including, without limit, copyright, trademark and designs. Any trademarks identified herein are trademarks of the Richelieu group of companies.
Richelieu assumes no risk and shall not be subject to any liability for damages or loss resulting from the specific use or application made of the product. Richelieu's liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party relating to the product shall not exceed the price paid for said products. In no event shall Richelieu be liable for any special, incidental or consequential damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence of Richelieu or otherwise.
Products returned for warranty purposes shall be subject to Richelieu's then applicable Return Policy.
The preceding information and technical documentation, information or recommendations issued by Richelieu verbally or in writing is believed to be accurate and is given in good faith, but no representation of warranty as to its completeness or accuracy is made. Suggestions for use or application are only opinions. Users are responsible for determining the suitability of these products for their own particular purpose. No representation of warranty, expressed or implied, is made with respect to information or products including, without limitation, warranties or merchantability, fitness for particular purpose, non-infringement of any third party patent or other intellectual property rights including, without limit, copyright, trademark and designs. Any trademarks identified herein are trademarks of the Richelieu group of companies.
Richelieu assumes no risk and shall not be subject to any liability for damages or loss resulting from the specific use or application made of the product. Richelieu's liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party relating to the product shall not exceed the price paid for said products. In no event shall Richelieu be liable for any special, incidental or consequential damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence of Richelieu or otherwise.
Products returned for warranty purposes shall be subject to Richelieu's then applicable Return Policy.
