149BC Pre-Built Pocket Door Frame and Hardware Kit

Product #: 149150BC1

Description

Adjustable dimensions

Adjustable Pre-Built Pocket Door Frame System
For one sliding pocket door with a thickness of up to 1-3/4" for a finished opening of 24" to 36". The jump-proof track is constructed of corrosion-resistant aluminum.

TECHNICAL SPECIFICATIONS

Product number
149150BC1
Door Material
Wood
Door Thickness
1 3/8 to 1 3/4 in
Finish/Color
Mill Finish (M)
Door Height
80 in
Track Length
72 in
Track Material
Aluminum
Door Mounting Method
Screw
Door Width
24 to 36 in
Number of Doors
1
Roller Type
Axle (Bushing)
Roller Position
Upper
Track Mounting
Ceiling Mount
Weight Capacity per Door
Max. 150 lb
Soft-Closing
No
Brand
Onward

ADVANTAGES AND BENEFITS

- Jump-proof track and rollers
- Pre-assembled header assembly for quick installation
- Easy door installation and removal for painting and repair

INCLUDED PRODUCT(S)

1 pre-built adjustable pocket door frame, 1 track mounted into a wood header, 1 door bumper, 2 door hangers and plates, 1 set of door glides, and all nails and screws required for mounting. Door panel and trim not included.

IMPORTANT INFORMATION

For bi-parting applications, use 2465005IP

DISCLAIMER

Note: Picture for visual reference only: actual product may vary from that shown in photo. Be sure to order hardware before beginning fabrication or installation work. Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice. All technical drawings and documents contain examples for the assembly of different suppliers' hardware. The customer cannot make any claims based on the use of these documents. No responsibility is assumed for design details relating to a construction or project. At all times, execution and installation must be undertaken by qualified persons. Never exceed the maximum weight or the maximum dimensions recommended by the manufacturer. Always be sure to install the product correctly using the appropriate fixation for your material. Use a dry cloth to remove fragments, dust, and residue (wood and/or aluminum sawdust) from rails before the installation of the hangers. Never use any spray lubricant on these products. Disclaimer: The preceding information as well as any technical recommendations given in writing, verbally or based on tests are provided to the best of our knowledge. However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
149BC Pre-Built Pocket Door Frame and Hardware Kit

Product number: 149150BC1