R-View Sliding Door Solutions
CONNECT - Glass Door Wall Mount Sliding System
Strap mount trolley for 10 mm (3/8") thick glass for flat track
The CONNECT is a wall mount/barn door sliding system with a strap mount trolley, running on a secure stainless steel flat track. A versatile sliding door solution with optional soft-close mechanism and track extensions. The standard system includes a unique modular component track system that is packed into an easy-to-handle box that can be economically shipped to a job site.
- Required products
- Technical specifications
- Suggested products
- Related documents
- Advantages and benefits
- Important Information
Requires the following products
Bag of 8 units
|Track Mounting||Wall Front|
|Type of Door||Glass|
|Finish/Color||Stainless Steel (170)|
|Weight Capacity per Door||Max. 176 lb*|
|Door Position||In Front of Wall|
|Number of Doors||1|
|Door Width||28 to 36 in|
|Door Thickness||13/32 in*|
|Roller Type||Ball Bearing|
|Maximum Door Height||94 1/2 in*|
|Rail Type||Flat Bar|
|Rail Material||Stainless Steel|
|Rail Finish||Stainless Steel|
|Rail Length||67 7/8 in|
|Soft-Close Type||Both Ends Operation|
|Soft-Close Mechanism||Available, Sold Separately|
|Door Mounting Method||Drill|
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
- Pre-drilled running rails for 16" centers.
- Depending on the size of your door, the soft-close system can be installed on either side of the door and is hidden out of sight between the running rail and the wall.
- Endless custom possibilities with the use of optional rail connector kits.
Designed for glass doors, weighing up to 176 lbs (80 kg) when installed in the position closest to the wall.
Door capacity will be reduced depending on the sleeve combination used.
Designed for doors ranging in width from 28" to 34" (up to 48'' with the optional Rail Connector set).
The use of a laser level or minimum a 4' spirit level is recommended.
Picture is for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice.
All technical drawings and documents contain examples for the assembly of different supplier's hardware. The customer cannot make any claims based on the use of these documents. No responsibility is assumed for design details relating to the construction or project.
At all times, execution and installation must be undertaken by qualified persons.
Always make sure to install the product carefully using the appropriate fixation for your material.
Never exceed the maximum weight or the maximum dimensions recommended by the manufacturer.
Never use any spray lubricant on these products.
Use a dry cloth to remove fragments, dust, and residue (sawdust and/or aluminum) from rails before the installation of the hangers.