Mirage Sliding Door System
Two-part flat bar running rail with z-design connecting ends
The Mirage top-mounted sliding door hardware provides a functional, versatile and secure sliding door solution for slightly heavier doors while remaining discreet!
Our flat bar running rail with its z-design connecting ends allows for a virtually seamless operation and the installation of a hidden soft-close system.
A sure-fire easy installation with fixation points pre-drilled in the running rail for 16" centers.
As opposed to being mounted on brackets, the system is affixed directly to the wall through the running rail with the combination of spacing sleeves and our lift-locking pin. It therefore eliminates the risk of your door shifting or coming off the track, rendering your space safe for all.
- Required products
- Technical specifications
- Suggested products
- Related documents
- Advantages and benefits
- Important Information
Requires the following products
Bag of 8 units
|Track Mounting||Wall Front|
|Type of Door||Wood|
|Finish/Color||Stainless Steel (170)|
|Weight Capacity per Door||Max. 265 lb*|
|Groove Needed for Guiding System||Yes|
|Door Position||In Front of Wall|
|Number of Doors||1|
|Door Width||28 to 34 in|
|Door Thickness||1 3/8 to 1 25/32 in*|
|Roller Type||Ball Bearing|
|Rail Type||Flat Bar|
|Rail Material||Stainless Steel|
|Rail Finish||Stainless Steel|
|Rail Length||67 7/8 in|
|Soft-Close Type||Both Ends Operation|
|Soft-Close Mechanism||Available, Sold Separately|
|Door Mounting Method||Screw|
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
- Guiding Tracks and Accessories for sliding door
- Sliding Door Soft-Close Mechanisms
- Pre-drilled running rails for 16" centers.
- Depending on the size of your door, the soft-close system can be installed on either side of the door and is hidden out of sight between the running rail and the wall.
- Endless custom possibilities with the use of optional rail connector kits.
Designed for wood doors, weighing up to 264 lb (120 kg) when installed in the position closest to the wall.
Door capacity will be reduced depending on the sleeve combination used.
Designed for doors ranging in width from 28" to 34" (up to 48'' with the optional Rail Connector set).
The use of a laser level or minimum a 4' spirit level is recommended.
Picture is for visual reference only: actual product may vary from that shown in photo.
Be sure to order hardware before beginning fabrication or installation work.
Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice.
All technical drawings and documents contain examples for the assembly of different supplier's hardware. The customer cannot make any claims based on the use of these documents. No responsibility is assumed for design details relating to the construction or project.
At all times, execution and installation must be undertaken by qualified persons.
Always make sure to install the product carefully using the appropriate fixation for your material.
Never exceed the maximum weight or the maximum dimensions recommended by the manufacturer.
Never use any spray lubricant on these products.
Use a dry cloth to remove fragments, dust, and residue (sawdust and/or aluminum) from rails before the installation of the hangers.