R-Elluzion Sliding Door System
Solid steel rail connector and run stabilizer
The R-Elluzion top-mounted sliding door hardware provides a functional, versatile and secure sliding door solution for slightly heavier doors while remaining discreet!
The rail connector inserts just over an inch into the solid running rail rod ensuring stability and allowing for a virtually seamless sliding operation.
A sure-fire easy installation with fixation points pre-drilled in the running rail for 16" centers.
As opposed to being mounted on brackets, the system is affixed directly to the wall through the running rail with the combination of spacing sleeves and our lift-locking pin. It therefore eliminates the risk of your door shifting or coming off the track, rendering your space safe for all.
- Required products
- Technical specifications
- Suggested products
- Related documents
- Advantages and benefits
- Important Information
Requires the following products
Bag of 8 units
|Track Mounting||Wall Mount|
|Finish/Color||Stainless Steel (170)|
|Weight Capacity per Door||Max. 265 lb*|
|Groove Needed for Guiding System||Yes|
|Number of Doors||1|
|Door Width||28 to 34 in|
|Door Thickness||1 3/8 to 1 25/32 in*|
|Roller Type||Ball Bearing|
|Track Type||20 mm Rod|
|Track Material||Stainless Steel|
|Track Finish||Stainless Steel|
|Track Length||67 7/8 in|
|Soft-Close Type||Soft Stop|
|Door Mounting Method||Screw|
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
- Pre-drilled running rails for 16" centers.
- Full rod and connectors ensure added stability.
- Endless custom possibilities with the use of optional rail connector kits.
Designed for wood doors, weighing up to 265 lb (120 kg) when installed in the position closest to the wall.
Door capacity will be reduced depending on the sleeve combination used.
Designed for doors ranging in width from 28" to 34" (up to 48'' with the optional Rail Connector set).
The use of a laser level or minimum a 4' spirit level is recommended.