Silo Sliding Door System

Product #: 8916604170


Strap mount with solid running rail for wood doors

The Silo strap mount sliding door hardware provides a functional, versatile and secure sliding door solution with a chic look!
The rail connector inserts just over an inch into the solid running rail rod ensuring stability and allowing for a virtually seamless sliding operation.
A sure-fire easy installation with fixation points pre-drilled in the running rail for 16" centers.
As opposed to being mounted on brackets, the system is affixed directly to the wall through the running rail with the combination of spacing sleeves and our lift-locking pin. It therefore eliminates the risk of your door shifting or coming off the track, rendering your space safe for all.


Requires the following products

Bag of 8 units


Product number
Track Mounting
Wall Mount
Door Material
Stainless Steel (170)
Weight Capacity per Door
Max. 176 lb*
Groove Needed for Guiding System
Number of Doors
Door Width
28 to 34 in
Door Thickness
1 3/8 to 1 25/32 in*
Roller Type
Ball Bearing
Roller Position
Track Type
Track Material
Stainless Steel
Track Finish
Stainless Steel
Track Length
67 7/8 in

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.



- Pre-drilled running rails for 16" centers.
- Full rod and connectors ensure added stability.
- Endless custom possibilities with the use of optional rail connector kits.


Hotel room, bedroom, office.


With custom spacing sleeves of 11 mm to 32 mm long, your door can be mounted at various distances from the wall to allow enough space for framing, moldings, etc. Designed for wood doors, weighing up to 176 lb. (80 kg) when installed in the position closest to the wall. Door capacity will be reduced depending on the sleeve combination used. Designed for doors ranging in width from 28" to 34" (up to 48'' with the optional Rail Connector set). The use of a laser level or minimum a 4' spirit level is recommended.

Picture is for visual reference only: actual product may vary from that shown in photo. Be sure to order hardware before beginning fabrication or installation work. Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice.

All technical drawings and documents contain examples for the assembly of different supplier's hardware. Customer cannot make any claims based on the use of these documents. No responsibility is assumed for design details relating to the construction or project.

Installation should be undertaken by qualified persons. Ensure product is correctly installed using anchors that are appropriate for the supporting material. Never exceed maximum weight or manufacturer-recommended maximum dimensions. Never use any spray lubricant on these products. Use a dry cloth to remove all fragments, dust, and residue (sawdust and/or aluminum) from rails before the installation of the roller units.


The preceding information as well as any technical recommendations given in writing, verbally or based on tests are provided to the best of our knowledge. However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
Silo Sliding Door System

Product number: 8916604170