The Ferris Wheel Kit

Oversize roller hardware kit for wood door

The Ferris Wheel is a hardware set with 2 big 120 mm trolleys/rollers and end track stoppers for wood doors. The hardware set includes all the basic fittings for 1 wood door; see below to view the list of all the components included in the basic hardware set. Sold separately, you may select from 3 different length track sets that include basic wall mounts and fasteners. The tracks are pre-drilled for the wall mounts and for machines to accept connector plates (sold separately) to join tracks. Also the back of the track is machined to accept soft-close mechanisms (sold separately). For residential applications.

Product # 24602090


Requires ONE of the following products

Flat Bar Track/Rail, Wall Mount Matte Black Product no. 24600190
  • Track Length: 78 3/4 in*
  • Number of Doors: 1
Flat Bar Track/Rail, Wall Mount Matte Black Product no. 24600290
  • Track Length: 98 3/8 in*
  • Number of Doors: 2 / 1
Flat Bar Track/Rail, Wall Mount Matte Black Product no. 24600390
  • Track Length: 9 ft 10 in*
  • Number of Doors: 2 / 1


Product number 24602090
Program R-Space
Track Mounting Wall Mount
Function Straight Sliding
Door Material Wood
Style Rustic
Finish/Color Black
Material Steel
Number of Doors 1
Door Width 24 to 60 in
Door Thickness 1 3/8 to 1 3/4 in
Roller Type Ball Bearing
Roller Position Upper
Maximum Door Height 8 ft 6 in*
Track Length 78 3/4 to 118 in*
Soft-Closing No
Door Mounting Method Drill
Product Type Hardware
Brand Onward
Weight Capacity per Door 33.1 to 220 lb*

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.


Rails available in three lengths to allow you to install two kits end-to-end on the same rail.
Rails are pre-drilled at each end to allow for interconnection with other rails or the installation of soft close.

This kit provides 8 washers (for 3 m rails) to adjust the distance between track and wall and to allow the roller to properly slide on the track.
These washers must be installed only for this model (the "Ferris Wheel" kit).
Please note, if you have a shorter rail, you will need less than 8 washers.
Washer thickness: 6 mm.

Security: Each roller unit is equipped with a device that prevents derailment during rough use of the door.


- 2 trolley/roller units (120 mm wheels) with through bolt fasteners for 1-3/8" or 1-3/4" door
- 2 end bumpers with screws
- 2 anti-derailer units with screws
- 1 floor-level guide for wood door with screws


Picture is for visual reference only: actual product may vary from that shown in photo. Be sure to order hardware before beginning fabrication or installation work. Always use the instructions inside the packaging provided by the manufacturer.

Manufacturer reserves the right to make technical changes or modify information without prior notice. All technical drawings and documents contain examples for the assembly of different supplier's hardware. Customer cannot make any claims based on the use of these documents. No responsibility is assumed for design details relating to the construction or project.

Installation should be undertaken by qualified persons. Ensure product is correctly installed using anchors that are appropriate for the supporting material. Never exceed manufacturer-recommended maximum weight or dimensions. Never use any spray lubricant on these products. Use a dry cloth to remove all fragments, dust, and residue (sawdust and/or aluminum) from rails before the installation of the roller units.


The preceding information as well as any technical recommendations given in writing, verbally or based on tests are provided to the best of our knowledge. However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
The Ferris Wheel Kit

Product number: 24602090