Urban - Decorative Visible Rail System

Product #: 2460202ALPVC


Interior Barn Door

The Urban is a contemporary style aluminum sliding door kit for a single wall mount wood door weighing up to 165 lb (75 kg).

- Kit format including hardware set for one door and track set 78 in (2 m) long
- Sturdy and quick to install continued wall mount profile for upper track
- Silver anodized
- Smooth running top mount upper trolleys

The Urban is an ideal solution for residential applications.


Product number
Track Mounting
Wall Mount
Door Material
Satin Aluminum
Weight Capacity per Door
33.1 to 165 lb*
Anodized Aluminum
Groove Needed for Guiding System
Groove Width at the Bottom of Door
3/16 to 9/32 in*
Groove Depth
25/32 in*
Number of Doors
Door Width
24 to 36 in
Door Thickness
1 3/8 to 1 3/4 in
Roller Type
Ball Bearing
Roller Position
Track Type
Track Material
Anodized Aluminum
Track Finish
Satin Aluminum
Track Length
78 3/4 in*
Product Type
Complete Set

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.


Ball bearings for easy movement.
Security: To prevent derailment due to misuse, each bearing support is equipped with an anti-derailment device.


Interior access door.


1 two-meter mounting rail (track)
2 single roller supports
2 bumpers
2 end caps
1 door bottom guide
Screws are included


Door and door handle not included. To reduce operating noise, use a door that is heavier than the minimum weight: a solid wood door or a glass door is recommended. For privacy, it is best to use as door that is wider than the door opening. For example, a door 34" wide door is recommended for a 30" opening. The bottom of the door requires a groove for the concealed guiding system.

Preparation: Remove the moldings or install a piece of wood (not included) of the same length and thickness before setting the new hardware in place. This is to check door clearance. Ensure product is properly anchored/installed using anchors that are appropriate for the supporting material. Extra anchors that may be required are sold separately.

Picture is for visual reference only: actual product may vary from that shown in photo. Be sure to order hardware before beginning fabrication or installation work. Always use the instructions inside the packaging provided by the manufacturer, as the manufacturer reserves the right to make technical changes or modify information without prior notice.

All technical drawings and documents contain examples for the assembly of different supplier's hardware. Customer cannot make any claims based on the use of these documents. No responsibility is assumed for design details relating to the construction or project.

Installation should be undertaken by qualified persons. Ensure product is correctly installed using anchors that are appropriate for the supporting material. Never exceed maximum weight or manufacturer-recommended maximum dimensions. Never use any spray lubricant on these products. Use a dry cloth to remove all fragments, dust, and residue (sawdust and/or aluminum) from rails before the installation of the roller units.


The preceding information as well as any technical recommendation given in writing, verbally or based on tests are provided to the best of our knowledge. However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.
Urban - Decorative Visible Rail System

Product number: 2460202ALPVC