Line art
CS Cavity Sliders Pocket Door Frame
To add to cart, choose from the options below.
Double-wall aluminum frame
The CS Cavity Sliders Pocket Door Frame is for single sliding doors weighing from 40 lbs (90 kg) to 500 lbs (227 kg) each. Made for standard 2 x 4 wood and metal wall stud construction.
Features:
- Precut, sturdy double-wall aluminum pocket frame structure suitable for doors from 26 in (660 mm) to 48 in (1.21 m) wide and 80 in (2.03 m) to 96 in (2.43 m) tall
- Special-order frame available for doors 36 in (914 mm) wide and up to 120 in (3.05 m) tall
- Frames can be custom cut to accommodate other door widths and heights according to project needs
- Compatible with CS M6, M8, and SofStop soft close carriage/hardware sets (sold separately)
- Low profile upper track is part of the upper structure of the pocket frame
- Trim clips for easy press-on mounting of door jamb trim
- Simple, flexible, and low-cost installation
Ideal for for a wide variety of applications in residential, commercial, and institutional projects.
IMPORTANT: For 2 x 6 wall construction, reference the CS Ultimate Pocket Door Frame.
Features:
- Precut, sturdy double-wall aluminum pocket frame structure suitable for doors from 26 in (660 mm) to 48 in (1.21 m) wide and 80 in (2.03 m) to 96 in (2.43 m) tall
- Special-order frame available for doors 36 in (914 mm) wide and up to 120 in (3.05 m) tall
- Frames can be custom cut to accommodate other door widths and heights according to project needs
- Compatible with CS M6, M8, and SofStop soft close carriage/hardware sets (sold separately)
- Low profile upper track is part of the upper structure of the pocket frame
- Trim clips for easy press-on mounting of door jamb trim
- Simple, flexible, and low-cost installation
Ideal for for a wide variety of applications in residential, commercial, and institutional projects.
IMPORTANT: For 2 x 6 wall construction, reference the CS Ultimate Pocket Door Frame.
| Product # | Overall Length | Door Height | Door Width |
|---|---|---|---|
| CSS4K2280 | 52 in | 96 in | 26 in |
| CSS4K2668 | 60 in | 80 in | 24 to 30 in |
| CSS4K2680 | 60 in | 96 in | 24 to 30 in |
| CSS4K2868 | 64 in | 80 in | 24 to 32 in |
| CSS4K3068 | 72 in | 80 in | 24 to 36 in |
| CSS4K3080 | 72 in | 96 in | 24 to 36 in |
| CSS4K3680 | 84 in | 96 in | 30 to 42 in |
| CSS4K4080 | 96 in | 96 in | 30 to 48 in |
ADVANTAGES AND BENEFITS
- Sturdy double wall aluminum pocket frame structure can be cut down to accommodate customized door widths and heights
- Low profile upper track is part of the structure of the pocket frame
- Trim clips for easy press-on mounting for door jamb trim
- Low profile upper track is part of the structure of the pocket frame
- Trim clips for easy press-on mounting for door jamb trim
TECHNICAL SPECIFICATIONS
Door Material
Wood
Door Thickness
1 3/8 to 1 3/4 in
Compatible with
Cavity Sliders
Door Installation
Top Hung
Running Track Fixing
Recessed
Packaging Format
Box
Load Capacity
198 to 500 lb*
Product type
Hardware for Bypassing Doors
Manufacturing Material
Aluminum
Number of Doors
1
Door Position
Concealed Inside Wall
Roller Position
Upper
Door Movement
Pocket Door
Track Mounting
Ceiling Mount
Brand
Cavity Sliders
Application
Standard Access Door, Pocket Door
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
INCLUDED PRODUCT(S)
Included in main box:
- Aluminum double wall frame structure
- Connector brackets
- Top and bottom fixing block profiles
- Horizontal structure profiles
- Upper track
- Floor guide
- Aluminum double wall frame structure
- Connector brackets
- Top and bottom fixing block profiles
- Horizontal structure profiles
- Upper track
- Floor guide
IMPORTANT INFORMATION
For 3/4 in (19 mm) jamb thickness. #8 screws and appropriate anchors required for installation (not included). A groove is required for the bottom of the door for the floor guide, see instructions. Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection. See the instructions for rough opening and other dimensions.
DISCLAIMER
Please make sure to read the entirety of the installation manual before proceeding with the installation. For 3/4 in (19 mm) jamb thickness. #8 screws and appropriate anchors required for installation (not included). A groove is required for the bottom of the door for the floor guide, see instructions. Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection. See the instructions for rough opening and other dimensions. Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
- Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
