GV Suspension Profile for Glass, HAWA
Product №: 65919868GV
Length
Description
For Variofold, Centerfold and Variotec
The GV Suspension Profile is for HAWA sliding glass door systems in the Junior, Variofold/Centrefold and Variotec series. Accepts a wide range of glass thicknesses. Select the correct glass fixing set options for your application. Brushed anodized finish on aluminum.
REQUIRED PRODUCTS
|
Requires ONE of the following products |
|||||||
|---|---|---|---|---|---|---|---|
|
Bag
|
||||||
|
OR
| |||||||
|
Per unit
|
||||||
TECHNICAL SPECIFICATIONS
Product №
65919868GV
Product type
Suspension Profile
Door Material
Glass
Finish
Bronze Anodized Aluminum
Compatible with
Hawa Variotec, Hawa Variofold and Centerfold
Width
36 mm
Height
105 mm
Length
1 200 mm
Door Thickness
10.8 to 12.8 mm
Door Movement
Movable Wall
Weight Capacity per Door
40 to 160 kg
Detailed Door Movement
Single sliding, End folding, Center folding, Stacking, Multi-Folding, Fixed Stationary Glass
SUGGESTED PRODUCTS
- Decorative Accessories
- Door Guides for Sliding Door Systems
- Hardware Sets
- Mortice Locks, Latches and Striker Plates for Sliding Doors
- Accessories for Movable Walls
IMPORTANT INFORMATION
- Please read the entirety of the installation manual before proceeding with installation.
- Wear safety gear such as gloves, safety glasses, safety shoes and ear protection
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residue (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
- Wear safety gear such as gloves, safety glasses, safety shoes and ear protection
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residue (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
DISCLAIMER
Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
