TERNO VETRO 40 Clamp Shoes with Covers
Product # 89K0328A12
Does not require glass drilling
The TERNO VETRO 40 Clamp Shoe set with silver anodized covers for glass thickness of 3/8 in (10 mm) and 1/2 in (12.7 mm).
Features:
- Maximum weight capacity for two clamps of 264 lb (120 kg)
- Does not require glass drilling
- Low profile with 1 9/16 in (40 mm) height
- Silver anodized finish
- Compatible with TERNO VETRO hardware sets
Features:
- Maximum weight capacity for two clamps of 264 lb (120 kg)
- Does not require glass drilling
- Low profile with 1 9/16 in (40 mm) height
- Silver anodized finish
- Compatible with TERNO VETRO hardware sets
| Product # | Door Thickness | Packaging format |
|---|---|---|
| 89K0328A12 | 12 to 12.7 mm | Set |
| 89K0327A10 | 10 to 10.7 mm | Per unit |
ADVANTAGES AND BENEFITS
- Maximum weight capacity for two clamps of 264 lb (120 kg)
- Does not require glass drilling
- Low profile with 1 9/16 in (40 mm) height
- Does not require glass drilling
- Low profile with 1 9/16 in (40 mm) height
TECHNICAL SPECIFICATIONS
Product #
89K0328A12
Product type
Decorative Hardware
Door Material
Glass
Finish
Anodized Aluminum
Door Installation
Top Hung
Load Capacity
Max. 120 kg
Manufacturing Material
Nylon, Aluminum, Plastic
Number of Doors
1
Door Height
2 700 mm
Door Width
600 to 1 200 mm
Door Movement
Straight Sliding
Detailed Door Movement
Single sliding
Application
Standard Access Door
INCLUDED PRODUCT(S)
- 4 profiles for clamps
- 4 gasket strips
- 4 end caps
- 4 fascia covers
- Screws and fasteners for individual components only
- 4 gasket strips
- 4 end caps
- 4 fascia covers
- Screws and fasteners for individual components only
IMPORTANT INFORMATION
IMPORTANT: Use metric dimensions for greater accuracy during installation.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
DISCLAIMER
Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
