TERNO VETRO Bottom Profile Type 1775
Product # 891775A210
Length
For fixed glass
The TERNO VETRO Bottom Profile Type 1775 is designed for fixed glass partitions with a thickness of 3/8 in (10 mm) to 1/2 in (12.7 mm). Works with profile Type 1776 to secure the glass at the bottom. Silver anodized finish. Installed with press fit seals type 324 and 326 to install the glass panels. Select from four types of end cap options from the TERNO VETRO End Cap series.
ADVANTAGES AND BENEFITS
Secure to the bottom of fixed glass.
TECHNICAL SPECIFICATIONS
Product #
891775A210
Product type
Decorative Hardware
Door Material
Glass
Finish
Anodized Silver
Compatible with
TERNO VETRO
Brand
Terno
Application
Glass Partition, Showcase, L-Shape Partition, T-Shape Partition
Brand Model
Terno Vetro Fluid
SUGGESTED PRODUCTS
- Sliding Solutions for Architectural Applications
- Decorative Accessories
-
-
Terno Glass Retaining Profile
Product # 89324KIT1011Door Thickness: 12 to 12.7 mmRoll of 10 linear meter -
Terno Glass Retaining Profile
Product # 89326KIT1011Door Thickness: 10 to 10.7 mmRoll of 10 linear meter
IMPORTANT INFORMATION
IMPORTANT
- Use metric dimensions for greater accuracy during installation.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
- Use metric dimensions for greater accuracy during installation.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
DISCLAIMER
Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
