TERNO VETRO U-Profile Type 1773
Product №: 891773A3
Description
For fixed glass
The TERNO VETRO U-Profile Type 1773 is designed for a fixed glass partition with a thickness of 3/8 in (10 mm) to 1/2 in (12.7 mm). Silver anodized finish. Installed to the ceiling and works with press fit seals type 324 and 326 to install the glass panels. Select from four types of end cap options from the TERNO VETRO End Cap series.
TECHNICAL SPECIFICATIONS
Product №
891773A3
Product type
Profile
Door Material
Glass
Finish
Anodized Silver
Compatible with
TERNO VETRO
Detailed Door Movement
Fixed Stationary Glass
SUGGESTED PRODUCTS
- Decorative Accessories
- Sliding Solutions for Architectural Applications
-
Terno Glass Retaining Profile
Product № 89326KIT1011Door Thickness: 13/32 to 13/32 in*Roll of 10 linear meter -
Terno Glass Retaining Profile
Product № 89324KIT1011Door Thickness: 15/32 to 1/2 in*Roll of 10 linear meter
IMPORTANT INFORMATION
IMPORTANT: Use metric dimensions for greater accuracy during installation.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
DISCLAIMER
Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
