CavitySliders CS Hardware Set
|Product №||Stopper||Weight Capacity per Door|
|DKM0611||One||40 to 200 lb|
|DKM0811||One||200 to 500 lb|
|DKM0621||Two||40 to 200 lb|
|DKM0821||Two||200 to 500 lb|
CarriSnap mounting plate
The Cavity Sliders CS hardware sets are designed for sliding wood doors weighing up to 500 lb (227 kg) each.
- Two types of carriage/hardware sets to choose from: M6 for 200 lb (90 kg) and M8 for 500 lb (227 kg) doors
- Select from hardware sets with one or two track stops
- CarriSnap mounting suspension plate for the top of the door for mounting and releasing the upper trolley without tools
- Large wheel trolleys with precision ground bearings for smooth running
- Simple and flexible low-cost installation
Requires the following products
|See Door Height and other options|
- Sliding Solutions for Architectural Applications
- Hardware for Pocket Doors
- Stoppers and Soft-Close Mechanisms
- Mounting Accessories
CS Track StopperProduct № ZK00377Per unit
- CarriSnap mounting suspension plate
- Track stopper
- Floor guide
- Adjustment tool
- Screws and fasteners for individual components only
A groove is required for the bottom of the door for the floor guide, see instructions.
Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
Never spray lubricant on this product.
Do not exceed stated limitations and parameters. This will cause early wear and performance failure.