Hardware set for system Clipo 36 HM IS

Product №: 1893358071


Product №
Door Position
Roller Position
Door Material
Product type
Roller Type
Axle (Bushing)
Weight Capacity per Door
79.4 lb*
Number of Doors
Door Height
Max. 94 1/2 in*
Door Width
Max. 39 3/8 in*
Door Thickness
3/4 to 31/32 in*
Detailed Door Movement
Single sliding

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.


36 HM IS


- 2 housings for wood doors
- 2 bearings
- 2 stops
- 1 lower guide
- 2 flat head screws for 3 x 12 mm chipboard
- 4 flat head screws for 3.5 x 45 mm chipboard.


Pictures provided for visual reference only: actual product may vary.

All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please ensurer parts and quantities listed in your order are correct before proceeding to checkout.

Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify or otherwise supplement any previously issued product and/or technical information as deemed required from time to time, without prior notice.

The documentation, drawings and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.

Installation of the Product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper anchoring methods, as appropriate for each substrate. We trust that anyone installing these products has the required skills, knowledge and experience. Richelieu expressively disclaims any liability for results obtained through improper use or installation.

Always remove debris / dust / residue (sawdust and / or aluminum filings) from the rails using a dry cloth before installing carriage bearings.

Never use spray lubricant.


By accessing or referring to this document, or by using Richelieu's Website, you accept all terms as they apply from time to time. This legal disclaimer is in no way limited to or altered by any other terms or conditions. Richelieu may change said terms at its discretion and without prior notice. A version of the most current terms will always be available on Richelieu's Website. The preceding information and technical documentation, information or recommendations issued by Richelieu verbally or in writing are believed to be accurate and are given in good faith, but no representation of warranty as to its completeness or accuracy is made. Suggestions for uses or applications are only opinions. Users are responsible for determining the suitability of these products to their own particular purpose. No representation of warranty, expressed or implied, is made with respect to information or products including, without limitation, warranties or merchantability, fitness for particular purpose, non-infringement of any third party patent or other intellectual property rights including, without limit, copyright, trademark and designs. Any trademarks identified herein are trademarks of the Richelieu group of companies. Richelieu assumes no risk and shall not be subject to any liability for damage or loss resulting from the specific use or application made of the product. Richelieu's liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party relating to the product shall not exceed the price paid for said products. In no event shall Richelieu be liable for any special, incidental, or consequential damages (including loss of use, loss of profit, or claims of third parties) however caused, whether by the negligence of Richelieu or otherwise. Products returned for warranty purposes shall be subject to Richelieu's then applicable Return Policy.