Line Art - Hawa Junior 100 B Acoustics Wall Mount
HAWA JUNIOR 100 B ACOUSTICS Hardware set
Product №: 8930427
Set
Description
Stopper with dampers
The HAWA JUNIOR 100 B ACOUSTICS Hardware set is for one wood door weighing up to 100 kg (220 lb). The door is supported from the top of with a mortised/recessed suspension profile and quiet-running ball bearing wheels. This set includes SoftStop stopper with dampers and an adjustable retention device to cushion stop the door quietly and resist bounce back. Very low pull force required to operate door.
TECHNICAL SPECIFICATIONS
Product №
8930427
Door Installation
Top Hung
Stopper
Two
Minimum Door Width
29 1/2 to 49 1/4 in*
Door Material
Wood
Roller Type
Ball Bearing
Weight Capacity per Door
88.2 to 220 lb*
Number of Doors
1
Door Height
98 3/8 in*
Door Thickness
1 23/32 to 1 31/32 in*
Track type
Box Track
Track Mounting
Wall Mount, Pocket Door
Door Movement
Straight Sliding
Brand
Junior 100 Acoustics
Detailed Door Movement
Single sliding, Pocket door
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
INCLUDED PRODUCT(S)
- 2 two-wheel carriages
- 2 suspension profile plates with M10 screws
- 1 SoftStop with ramp and adjustable retention spring
- 1 SoftStop with adjustable retention spring
- 4 end caps for suspension profile
- 1 locking wrench
- Screws and fasteners for individual components only
- 2 suspension profile plates with M10 screws
- 1 SoftStop with ramp and adjustable retention spring
- 1 SoftStop with adjustable retention spring
- 4 end caps for suspension profile
- 1 locking wrench
- Screws and fasteners for individual components only
IMPORTANT INFORMATION
Use metric dimensions for greater accuracy during installation.
Please make sure to read the entirety of the installation manual before proceeding with the installation.
Always remove debris/dust/residue (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
Never spray lubricant on this product.
Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
Please make sure to read the entirety of the installation manual before proceeding with the installation.
Always remove debris/dust/residue (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
Never spray lubricant on this product.
Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
