Installation
HAWA JUNIOR 100 B ACOUSTICS Hardware set
Product # 8930427
Set
Stopper with dampers
The HAWA JUNIOR 100 B ACOUSTICS Hardware set is for one wood door weighing up to 100 kg (220 lb). The door is supported from the top of with a mortised/recessed suspension profile and quiet-running ball bearing wheels. This set includes SoftStop stopper with dampers and an adjustable retention device to cushion stop the door quietly and resist bounce back. Very low pull force required to operate door.
ADVANTAGES AND BENEFITS
- Quiet-running ball bearing wheels
- SoftStop stopper with dampers and adjustable retention device
- Adjustable
- SoftStop stopper with dampers and adjustable retention device
- Adjustable
TECHNICAL SPECIFICATIONS
Product #
8930427
Door Movement
Straight Sliding
Detailed Door Movement
Single sliding, Pocket door
Door Installation
Top Hung
Stopper
Two
Minimum Door Width
750 to 1 250 mm
Load Capacity
40 to 100 kg
Roller Type
Ball Bearing
Product type
Hardware Set
Door Material
Wood
Number of Doors
1
Track type
Box Track
Track Mounting
Wall Mount
Door Thickness
44 to 50 mm
Door Height
2 500 mm
Brand
Hawa
Application
Barn Door, Pocket Door
Brand Model
Hawa Junior 100 Acoustics
INCLUDED PRODUCT(S)
- 2 two-wheel carriages
- 2 suspension profile plates with M10 screws
- 1 SoftStop with ramp and adjustable retention spring
- 1 SoftStop with adjustable retention spring
- 4 end caps for suspension profile
- 1 locking wrench
- Screws and fasteners for individual components only
- 2 suspension profile plates with M10 screws
- 1 SoftStop with ramp and adjustable retention spring
- 1 SoftStop with adjustable retention spring
- 4 end caps for suspension profile
- 1 locking wrench
- Screws and fasteners for individual components only
IMPORTANT INFORMATION
Use metric dimensions for greater accuracy during installation.
Please make sure to read the entirety of the installation manual before proceeding with the installation.
Always remove debris/dust/residue (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
Never spray lubricant on this product.
Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
Please make sure to read the entirety of the installation manual before proceeding with the installation.
Always remove debris/dust/residue (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
Never spray lubricant on this product.
Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
