HAWA JUNIOR 100 Basic Hardware Set
To add to cart, choose from the options below.
Height adjustable
Hawa Junior 100 Basic hardware set for wood doors weighing up to 100 kg each.
Select from two types sets:
1) Junior 100 / Z surface mount suspension plate
2) Junior 100 / B mortise/rebate suspension plate
Includes floor mount rattle-free guide.
Compatible with various types of stops, standard stop, SoftStop stopper, Spring Stop and Soft Close mechanisms.
IMPORTANT: Upper trolleys (wheels) and type of stopper or soft close mechanism must be ordered separately.
Use metric dimensions for greater accuracy during installation.
Select from two types sets:
1) Junior 100 / Z surface mount suspension plate
2) Junior 100 / B mortise/rebate suspension plate
Includes floor mount rattle-free guide.
Compatible with various types of stops, standard stop, SoftStop stopper, Spring Stop and Soft Close mechanisms.
IMPORTANT: Upper trolleys (wheels) and type of stopper or soft close mechanism must be ordered separately.
Use metric dimensions for greater accuracy during installation.
| Product # | Compatible with |
|---|---|
| 8930152 | Junior 100 / B |
| 8930151 | Junior 100 / Z |
TECHNICAL SPECIFICATIONS
Door Movement
Straight Sliding
Detailed Door Movement
Single sliding
Roller Position
Upper
Door Installation
Top Hung
Stopper
None
Adjustable
Yes
Load Capacity
179 to 220 lb*
Product type
Hardware Set
Number of Doors
1
Door Width
25 5/8 to 59 in*
Door Thickness
1 3/8 to 3 5/32 in*
Door Height
72 7/8 to 157 in*
Soft-Closing
Sold Separately
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
SUGGESTED PRODUCTS
- Stoppers and Soft-Close Mechanisms
- Running and Guiding Tracks for Sliding Door Systems
IMPORTANT INFORMATION
IMPORTANT: Upper trolleys (wheels) and type of stopper or soft close mechanism must be ordered separately.
* The minimum door width 650 mm for better performance
* Use metric dimensions for greater accuracy during installation.
* Please make sure to read the entirety of the installation manual before proceeding with the installation.
* wear safety gear such as gloves, safety glasses, safety shoes and ear protection
* Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
* Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
* Never spray lubricant on this product.
* Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
* The minimum door width 650 mm for better performance
* Use metric dimensions for greater accuracy during installation.
* Please make sure to read the entirety of the installation manual before proceeding with the installation.
* wear safety gear such as gloves, safety glasses, safety shoes and ear protection
* Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
* Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
* Never spray lubricant on this product.
* Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
DISCLAIMER
Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
By accessing or referring to this document, or by using any of Richelieu's websites, you accept all applicable terms as they apply from time to time. This legal disclaimer is in no way limited or altered by any other terms or conditions. Richelieu may change said terms at its discretion and without prior notice. A version of the most current terms will always be available on Richelieu's website. The preceding information and technical documentation, information, or recommendations issued by Richelieu verbally or in writing is believed to be accurate and is given in good faith, but no representation of warranty as to its completeness or accuracy is made. Suggestions for use or application are only opinions. Users are responsible for determining the suitability of these products for their own particular purpose. No representation of warranty, expressed or implied, is made with respect to information or products including, without limitation, warranties or merchantability, fitness for particular purpose, non-infringement of any third party patent or other intellectual property rights including, without limit, copyright, trademark, and designs. Any trademarks identified herein are trademarks of the Richelieu group of companies. Richelieu assumes no risk and shall not be subject to any liability for damages or loss resulting from the specific use or application made of the product. Richelieu's liability for any claim, whether based on breach of contract, negligence, or infringement of any rights of any party relating to the product shall not exceed the price paid for said products. In no event shall Richelieu be liable for any special, incidental, or consequential damages (including loss of use, loss of profit, and claims of third parties) however caused, whether by the negligence of Richelieu or otherwise. Products returned for warranty purposes shall be subject to Richelieu's then applicable Return Policy.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
By accessing or referring to this document, or by using any of Richelieu's websites, you accept all applicable terms as they apply from time to time. This legal disclaimer is in no way limited or altered by any other terms or conditions. Richelieu may change said terms at its discretion and without prior notice. A version of the most current terms will always be available on Richelieu's website. The preceding information and technical documentation, information, or recommendations issued by Richelieu verbally or in writing is believed to be accurate and is given in good faith, but no representation of warranty as to its completeness or accuracy is made. Suggestions for use or application are only opinions. Users are responsible for determining the suitability of these products for their own particular purpose. No representation of warranty, expressed or implied, is made with respect to information or products including, without limitation, warranties or merchantability, fitness for particular purpose, non-infringement of any third party patent or other intellectual property rights including, without limit, copyright, trademark, and designs. Any trademarks identified herein are trademarks of the Richelieu group of companies. Richelieu assumes no risk and shall not be subject to any liability for damages or loss resulting from the specific use or application made of the product. Richelieu's liability for any claim, whether based on breach of contract, negligence, or infringement of any rights of any party relating to the product shall not exceed the price paid for said products. In no event shall Richelieu be liable for any special, incidental, or consequential damages (including loss of use, loss of profit, and claims of third parties) however caused, whether by the negligence of Richelieu or otherwise. Products returned for warranty purposes shall be subject to Richelieu's then applicable Return Policy.
