R-SPACE Interior Doors
HAWA PORTA 100 HM Hardware Set
The HAWA PORTA 100 HM Hardware Set is designed for a single sliding wood door with a weight capacity of up to 220 lb (100 kg).
- Concealed rebate mount suspension plate
- Track stoppers with adjustable retaining device
- Floor mounted guide wheel
- Optional soft-close mechanisms available for doors 133 lb (61 kg) to 220 lb (100 kg), sold separately
- Simple and flexible installation
- Smooth operation
IMPORTANT: Use metric dimensions for greater accuracy during installation. Cut a groove 1/2 in (12 mm) x 5/8 in (16 mm) at the bottom of the door for bottom guide.
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
- Cut a groove 1/2 in (12 mm) x 5/8 in (16 mm) at the bottom of the door for bottom guide.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
- 2 plastic suspension holders
- 2 steel housings for suspension holder
- 2 stops
- 1 floor guide
- Screws and fasteners for individual components only