Installation
HAWA VARIOTEC 150H Sliding Door System for 1 Door, Without Guide
Product # WEBKIT1243952
Simple adjustment
The HAWA VARIOTEC 150H Basic Sliding Door System Without Guide is a typical list of components for 1 sliding wood door for multi-door sliding partition system. Used for applications without a bottom guide channel. This is a top-hung sliding mechanism with ball bearing wheels stabilizing the door, for doors weighing up to 150 kg (330 lbs) each. Suspension profiles are rebated/mortised into the door to conceal hardware and allow for door adjustments. H-shape suspension profile works with press-fit brush seals to close gaps at the top of the door.
ADVANTAGES AND BENEFITS
Prepacked modular set for one sliding door
INCLUDED IN THIS WEBKIT
REQUIRED PRODUCTS
Requires the following products
HAWA VARIOTEC 150H Multi-Door Sliding Partition System
- Overall Length: 15 ft 11 in*
- Door Configurations: Perpendicular (90 degree) to upper track
- Number of Doors: 5
- Door Width: 38 1/4 to 38 1/4 in*
AND
HAWA VARIOTEC 150H Multi-Door Sliding Partition System
- Overall Length: 24 ft*
- Door Configurations: Parallel to upper track
- Number of Doors: 8
- Door Width: 35 3/8 to 39 3/8 in*
TECHNICAL SPECIFICATIONS
Product #
WEBKIT1243952
Door Movement
Movable Wall
Detailed Door Movement
Single sliding
Door Position
Inset/Inlay
Roller Position
Upper
Door Installation
Top Hung
Compatible with
Hawa Variotec
Adjustable
Yes
Load Capacity
132 to 331 lb*
Roller Type
Ball Bearing
Product type
Hardware Set
Door Material
Wood
Number of Doors
1
Door Width
23 5/8 to 59 in*
Track Mounting
Ceiling Mount
Door Thickness
1 3/8 to 2 3/8 in*
Door Height
70 7/8 to 157 in*
Soft-Closing
No
Brand
Hawa
Application
Sliding Wall
Brand Model
Hawa Variotec
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
SUGGESTED PRODUCTS
- Decorative Accessories
- Handle and Lock Accessories for Sliding Doors
- Mortice Locks, Latches and Striker Plates for Sliding Doors
- Hardware Sets
- Dust-Proof Keeper
IMPORTANT INFORMATION
IMPORTANT: Measure in millimeters (mm) for best accuracy during assembly and installation
- Please read the entirety of the installation manual before proceeding with installation.
- Wear safety gear such as gloves, safety glasses, safety shoes and ear protection
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residue (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
- Please read the entirety of the installation manual before proceeding with installation.
- Wear safety gear such as gloves, safety glasses, safety shoes and ear protection
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residue (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
DISCLAIMER
Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
