HAWA VARIOTEC 150H Sliding Door System for 1 Door, Without Guide

Product №: WEBKIT1243952


Simple adjustment

The HAWA VARIOTEC 150H Basic Sliding Door System Without Guide is a typical list of components for 1 sliding wood door for multi-door sliding partition system. Used for applications without a bottom guide channel. This is a top-hung sliding mechanism with ball bearing wheels stabilizing the door, for doors weighing up to 150 kg (330 lbs) each. Suspension profiles are rebated/mortised into the door to conceal hardware and allow for door adjustments. H-shape suspension profile works with press-fit brush seals to close gaps at the top of the door.


Prepacked modular set for one sliding door


Requires the following products

HAWA VARIOTEC 150H Multi-Door Sliding Partition System Product № WEBKIT1243958
  • Number of Doors: 8
  • Door Width: 897 to 1 000 mm
  • Door Configurations: Parallel to upper track
  • Overall Length: 7 315 mm
Per unit
HAWA VARIOTEC 150H Multi-Door Sliding Partition System Product № WEBKIT1243955
  • Number of Doors: 5
  • Door Width: 970 to 973 mm
  • Door Configurations: Perpendicular (90 degree) to upper track
  • Overall Length: 4 876 mm
Per unit


Product №
Door Position
Roller Position
Door Installation
Top Hung
Compatible with
Hawa Variotec
Door Material
Roller Type
Ball Bearing
Weight Capacity per Door
60 to 150 kg
Number of Doors
Door Height
1 800 to 4 000 mm
Door Width
600 to 1 500 mm
Door Thickness
35 to 60 mm
Track Mounting
Ceiling Mount
Door Movement
Movable Wall
Detailed Door Movement
Single sliding


IMPORTANT: Measure in millimeters (mm) for best accuracy during assembly and installation
- Please read the entirety of the installation manual before proceeding with installation.
- Wear safety gear such as gloves, safety glasses, safety shoes and ear protection
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residue (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure.


Pictures provided for visual reference only: actual product may vary. - All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout. - Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice. - The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers. - Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.