HAWA VARIOTEC 150H Sliding Door System with Guide for 1 Door

Product # WEBKIT1243953

Simple adjustment

The HAWA VARIOTEC 150H Sliding Door System with Guide includes all the components for 1 sliding wood door intended for use within a multi-door sliding partition system with a bottom guide channel. This is a top-hung sliding mechanism with ball bearing wheels with a door weight capacity of up to 150 kg (330 lbs). Suspension profiles are rebated/mortised into the door to conceal hardware and allow for door adjustments. H-shape suspension profiles work with press-fit brush seals to close gaps at the top and bottom of the door.


Pre-packed modular set for one sliding door.


Requires the following products
image required
HAWA VARIOTEC 150H Multi-Door Sliding Partition System
  • Overall Length: 20 ft 11 in*
  • Door Configurations: Parallel to upper track
  • Number of Doors: 6
  • Door Width: 41 1/8 to 45 1/4 in*
Product # WEBKIT1243956
image required
HAWA VARIOTEC 150H Multi-Door Sliding Partition System
  • Overall Length: 22 ft 11 in*
  • Door Configurations: Perpendicular (90 degree) to upper track
  • Number of Doors: 7
  • Door Width: 39 1/4 to 39 3/8 in*
Product # WEBKIT1243957


Product #
Door Movement
Movable Wall
Roller Position
Door Installation
Top Hung
Load Capacity
132 to 331 lb*
Product type
Hardware Set
Number of Doors
Door Width
23 5/8 to 59 in*
Track Mounting
Ceiling Mount
Door Thickness
1 3/8 to 2 3/8 in*
Door Height
70 7/8 to 157 in*
Brand Model
Hawa Variotec
Sliding Wall

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.


IMPORTANT: Measure in millimeters (mm) for best accuracy during assembly and installation.
- Please read the entirety of the installation manual before proceeding with installation.
- Wear safety gear such as gloves, safety glasses, safety shoes and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residue (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. Doing so will cause early wear and performance failure.


Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.