Installation
HAWA VARIOTEC 150H Sliding Door System with Guide for 1 Door
Product # WEBKIT1243953
Simple adjustment
The HAWA VARIOTEC 150H Sliding Door System with Guide includes all the components for 1 sliding wood door intended for use within a multi-door sliding partition system with a bottom guide channel. This is a top-hung sliding mechanism with ball bearing wheels with a door weight capacity of up to 150 kg (330 lbs). Suspension profiles are rebated/mortised into the door to conceal hardware and allow for door adjustments. H-shape suspension profiles work with press-fit brush seals to close gaps at the top and bottom of the door.
ADVANTAGES AND BENEFITS
Pre-packed modular set for one sliding door.
INCLUDED IN THIS WEBKIT
REQUIRED PRODUCTS
Requires the following products
HAWA VARIOTEC 150H Multi-Door Sliding Partition System
- Overall Length: 6 400 mm
- Door Configurations: Parallel to upper track
- Number of Doors: 6
- Door Width: 1 045 to 1 148 mm
AND
HAWA VARIOTEC 150H Multi-Door Sliding Partition System
- Overall Length: 7 010 mm
- Door Configurations: Perpendicular (90 degree) to upper track
- Number of Doors: 7
- Door Width: 997 to 1 000 mm
TECHNICAL SPECIFICATIONS
Product #
WEBKIT1243953
Door Movement
Movable Wall
Roller Position
Upper
Door Installation
Top Hung
Adjustable
Yes
Load Capacity
60 to 150 kg
Product type
Hardware Set
Number of Doors
1
Door Width
600 to 1 500 mm
Track Mounting
Ceiling Mount
Door Thickness
35 to 60 mm
Door Height
1 800 to 4 000 mm
Soft-Closing
No
Brand
Hawa
Application
Sliding Wall
Brand Model
Hawa Variotec
SUGGESTED PRODUCTS
- Decorative Accessories
- Handle and Lock Accessories for Sliding Doors
- Mortice Locks, Latches and Striker Plates for Sliding Doors
- Hardware Sets
- Dust-Proof Keeper
IMPORTANT INFORMATION
IMPORTANT: Measure in millimeters (mm) for best accuracy during assembly and installation.
- Please read the entirety of the installation manual before proceeding with installation.
- Wear safety gear such as gloves, safety glasses, safety shoes and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residue (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. Doing so will cause early wear and performance failure.
- Please read the entirety of the installation manual before proceeding with installation.
- Wear safety gear such as gloves, safety glasses, safety shoes and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residue (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. Doing so will cause early wear and performance failure.
DISCLAIMER
Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
