Line art
KN400C4896 Pocket Door Set
Product # KN400C4896
Length
Can be cut down
The KN400C4896 Pocket Door Set is designed for a wide and tall wood door weighing up to 150 lb (68 kg).
Features:
- Type C pocket frame and C-411 hardware set
- For doors 36 in (914 mm) to 48 in (1219 mm) wide and 96 in (2438 mm) tall
- For 2 x 4 wall construction
- Height adjustable device
- Self-supporting structural header track supported by brackets at each end
- Roll formed steel uprights for pocket frame
- Can be cut to size
- Floor mounted guide
IMPORTANT: Cut a groove 1 in (25.4 mm) x 29/32 in (23 mm) at the bottom of the door for bottom guide.
Features:
- Type C pocket frame and C-411 hardware set
- For doors 36 in (914 mm) to 48 in (1219 mm) wide and 96 in (2438 mm) tall
- For 2 x 4 wall construction
- Height adjustable device
- Self-supporting structural header track supported by brackets at each end
- Roll formed steel uprights for pocket frame
- Can be cut to size
- Floor mounted guide
IMPORTANT: Cut a groove 1 in (25.4 mm) x 29/32 in (23 mm) at the bottom of the door for bottom guide.
TECHNICAL SPECIFICATIONS
Product #
KN400C4896
Door Movement
Pocket Door
Detailed Door Movement
Single sliding
Door Position
Concealed Inside Wall
Roller Position
Upper
Door Installation
Top Hung
Soft-Close Direction
N/A
Running Track Fixing
Bracket
Stopper
Two
Packaging Format
Box
Finish
Mill Finish
Adjustable
Yes
Load Capacity
Max. 150 lb
Roller Type
Ball Bearing
Product type
Hardware Set
Door Material
Wood
Track type
Box Track
Door Width
36 to 48 in
Door Thickness
1 3/8 to 1 3/4 in
Door Height
96 in
Soft-Closing
No
Soft-Close Type
None
Brand
K.N. Crowder
Application
Pocket Door
INCLUDED PRODUCT(S)
- 1 header track
- 2 CP-830 drywall supports
- 1 C-914 guide channel
- 2 C-411 hangers
- 2 top plates
- 2 spinwheels
- 2 suspension bolts
- 2 stops
- CP-913 pocket guide
- 2 header brackets for track
- 3 floor brackets
- 4 steel uprights
- 1 rubber bumper
- Screws and fasteners for individual components only
- 2 CP-830 drywall supports
- 1 C-914 guide channel
- 2 C-411 hangers
- 2 top plates
- 2 spinwheels
- 2 suspension bolts
- 2 stops
- CP-913 pocket guide
- 2 header brackets for track
- 3 floor brackets
- 4 steel uprights
- 1 rubber bumper
- Screws and fasteners for individual components only
DISCLAIMER
- Cut a groove 1 in (25.4 mm) x 29/32 in (23.01 mm) at the bottom of the door for the bottom guide.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
