Instructions
ONWARD DOME Hardware set
Product # 89YMXC40
suspension plate with tooless lever
The ONWARD DOME hardware set for 1 sliding wood door weighing up to 150 lbs (68 kg). The door is top hung and supported by three wheel hanger with a surface mount suspension plate lever release. The floor guide is adjustable for various door thickness and guides the door on the outside. No groove is required for the bottom of the door. Suitable for door thickness 1-3/8 to 1-3/4 in (35 to 45 mm).
ADVANTAGES AND BENEFITS
* Ball bearing wheels
* Surface mount suspensions plate with tooless lever release
* No groove required for the bottom of the door
* Surface mount suspensions plate with tooless lever release
* No groove required for the bottom of the door
TECHNICAL SPECIFICATIONS
Product #
89YMXC40
Door Movement
Straight Sliding
Detailed Door Movement
Single sliding
Roller Position
Upper
Door Installation
Top Hung
Compatible with
Evanescence, Dome
Load Capacity
150 lb
Product type
Hardware Set
Door Material
Wood
Number of Doors
1
Door Width
15 to 50 in
Door Thickness
1 to 1 3/4 in
Door Height
120 in
Brand
Onward
SUGGESTED PRODUCTS
- Sliding Solutions for Architectural Applications
- Running and Guiding Tracks for Sliding Door Systems
INCLUDED PRODUCT(S)
* 2 upper 3-wheel hanger
* 2 suspension plate with lever
* 1 adjustable floor guide
* 1 bumper
* 1 wrench
* Screws and fasteners for individual components only
* 2 suspension plate with lever
* 1 adjustable floor guide
* 1 bumper
* 1 wrench
* Screws and fasteners for individual components only
IMPORTANT INFORMATION
Use imperial dimensions for greater accuracy during installation.
Please make sure to read the entirety of the installation manual before proceeding with the installation.
Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
Never spray lubricant on this product.
Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
Please make sure to read the entirety of the installation manual before proceeding with the installation.
Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
Never spray lubricant on this product.
Do not exceed stated limitations and parameters. This will cause early wear and performance failure.
