RO 44 Hardware Set for One Door

Product №: 8761RO44
Set

Description

Concealed and adjustable

The RO 44 hardware set is designed for one tall wood cabinet door for inset applications with a weight capacity of 132 lb (60 kg) per door.

Features:
- For wood doors 5/8 in (15 mm) to 3/4 in (20 mm) thick
- Operation runs on surface mount type RM 022 dual bottom track and guided by RM 030 upper dual upper guide track
- Includes upper track stopper with retaining device to resist door bounce back
- Simple and flexible installation

IMPORTANT: For optimal performance make sure the dimensions of the door are balanced. It is suggested to build the door height 3 times or less than the width of the door (max. 1:3 ratio).
Use metric dimensions for greater accuracy during installation.

ADVANTAGES AND BENEFITS

- For wood doors 5/8 in (15 mm) to 3/4 in (20 mm) thick
- Operation runs on surface mount type RM 022 dual bottom track and guided by RM 030 upper dual upper guide track
- Includes upper track stopper with retaining device to resist door bounce back
- Simple and flexible direct mount installation

TECHNICAL SPECIFICATIONS

Product №
8761RO44
Door Position
Inset/Inlay
Roller Position
Lower
Door Installation
Bottom Running
Door Material
Wood
Material
Plastic, Nylon
Weight Capacity per Door
132 lb*
Number of Doors
1
Door Height
31 7/8 to 96 in*
Door Width
19 5/8 to 48 in*
Door Thickness
19/32 to 25/32 in*
Door Movement
Straight Sliding
Detailed Door Movement
Single sliding, Bypassing
Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

INCLUDED PRODUCT(S)

- 2 upper guides
- 2 bottom running wheels
- 2 stoppers
- Screws and fasteners for individual components only

IMPORTANT INFORMATION

IMPORTANT: For optimal performance make sure the dimensions of the door are balanced. It is suggested to build the door height 3 times or less than the width of the door (max. 1:3 ratio).
- Use metric dimensions for greater accuracy during installation.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.

DISCLAIMER

Pictures provided for visual reference only: actual product may vary. - All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout. - Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice. - The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers. - Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.