Installation
RO 82 Hardware Set Series
To add to cart, choose from the options below.
Direct mount bracket
The RO 82 hardware sets series for one wood door for door weight capacities of 40 kg (88 lb), 80 kg (176 lb), and 100 kg (220 lb) each.
Features:
- Surface mount suspension plate
- Select from different hardware types
a) top mount suspension plate with standard stops
b) rear mount suspension plate with standard stops
c) top mount suspension plate with dual soft close mechanism for three different weight capacities
- Minimum door width 650 mm (25 1/2 in) for soft close mechanism
- All hardware sets operate on the same tracks
- Simple and Flexible direct mount installation
IMPORTANT: Use metric dimensions for greater accuracy during installation. Cut a groove 10 x 12 mm (3/8 x 1/2 in) for the plastic floor guide or 12 x 12 mm (1/2 x ½ in) for the floor roller guide.
Features:
- Surface mount suspension plate
- Select from different hardware types
a) top mount suspension plate with standard stops
b) rear mount suspension plate with standard stops
c) top mount suspension plate with dual soft close mechanism for three different weight capacities
- Minimum door width 650 mm (25 1/2 in) for soft close mechanism
- All hardware sets operate on the same tracks
- Simple and Flexible direct mount installation
IMPORTANT: Use metric dimensions for greater accuracy during installation. Cut a groove 10 x 12 mm (3/8 x 1/2 in) for the plastic floor guide or 12 x 12 mm (1/2 x ½ in) for the floor roller guide.
| Product # | Load Capacity | Door Width | Door Thickness | Soft-Closing |
|---|---|---|---|---|
| 891006 | 33.1 to 176 lb* | 23 5/8 to 60 in* | 23/32 to 1 13/32 in* | No |
| 892763RO82 | 33.1 to 220 lb* | 23 5/8 to 60 in* | 31/32 to 1 25/32 in* | No |
| 89RO82TP40 | 33.1 to 88.2 lb* | 25 5/8 to 60 in* | 31/32 to 1 25/32 in* | Yes |
| 89RO82TP80 | 88.2 to 176 lb* | 25 5/8 to 60 in* | 31/32 to 1 25/32 in* | Yes |
| 89RO82TP100 | 176 to 220 lb* | 25 5/8 to 60 in* | 31/32 to 1 25/32 in* | Yes |
ADVANTAGES AND BENEFITS
- Surface mount suspension plates
- Rear mount suspension plate for thin doors
- Standard stops with retaining device to reduce door bounce back
- Dual soft close mechanism for narrow doors
- All hardware sets operate on the same tracks
- Rear mount suspension plate for thin doors
- Standard stops with retaining device to reduce door bounce back
- Dual soft close mechanism for narrow doors
- All hardware sets operate on the same tracks
TECHNICAL SPECIFICATIONS
Door Movement
Straight Sliding
Detailed Door Movement
Single sliding, Bypassing, Biparting
Roller Position
Upper
Door Installation
Top Hung
Stopper
Two
Roller Type
Ball Bearing
Product type
Hardware Set
Door Material
Wood
Number of Doors
1
Door Height
35 3/8 to 108 in*
Application
Closet and Walk-In Closet, Standard Access Door
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
SUGGESTED PRODUCTS
- Door Guides for Sliding Door Systems
- Sliding Solutions for Architectural Applications
- Running and Guiding Tracks for Sliding Door Systems
IMPORTANT INFORMATION
IMPORTANT: Use metric dimensions for greater accuracy during installation. Cut a groove 10 x 12mm (3/8 x 1/2 in) for the plastic floor guide or 12 x 12mm (1/2 x ½ in) for the floor roller guide.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely to a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure and will void the warranty.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely to a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure and will void the warranty.
DISCLAIMER
Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
