SLIDE 40 Soft-Close Hardware Set

New
Product #: 189K3590
Set

Description

Concealed low profile soft-close mechanisms

The SLIDE 40 hardware set is designed for one wood cabinet door with two-way soft-close for inset applications with a weight capacity of 88 lb (40 kg) per door.
Features:
- For wood doors 3/4 in (18 mm) to 1 in (25 mm) thick
- 2 concealed low profile soft-close mechanisms included
- Rollers are equipped with anti-derailment springs
- Simple and flexible installation
IMPORTANT: The minimum door width with soft-close mechanism is 27 1/2 in (700 mm)

TECHNICAL SPECIFICATIONS

Product number
189K3590
Door Position
Inset/Inlay
Roller Position
Lower
Door Installation
Bottom Running
Running Track Fixing
Recessed
Door Material
Wood
Material
Plastic, Nylon, Metal
Number of Doors
1
Door Height
Max. 96 in*
Door Width
27 1/2 to 48 in*
Door Thickness
23/32 to 31/32 in*
Soft-Closing
Yes
Door Movement
Straight Sliding
Detailed Door Movement
Single sliding
Weight Capacity per Panel
88.2 lb*
Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

ADVANTAGES AND BENEFITS

- 2 concealed low profile soft-close mechanisms
- Rollers are equipped with anti-derailment springs
- Simple and flexible installation

INCLUDED PRODUCT(S)

- 2 bottom running wheels
- 2 upper guide wheels
- 2 soft-close mechanisms
- 4 stoppers
- 1 adjustment tool
- Screws and fasteners for individual components only

IMPORTANT INFORMATION

- IMPORTANT: The minimum door width with soft-close mechanism is 700 mm (27 1/2 in).
- Use metric dimensions for greater accuracy during installation.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure.

RELATED DOCUMENTS

DISCLAIMER

Pictures provided for visual reference only: actual product may vary. - All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout. - Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice. - The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers. - Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
SLIDE 40 Soft-Close Hardware Set

Product number: 189K3590

Set