Instructions
Terno CLASSIC Hardware Set with standard stop
Product # 89K08121S
Set
Retaining device to resist door bounce back
The Terno CLASSIC hardware set with standard stop is a straight sliding door system for one wood door with door weight capacity of 80 kg each.
Features:
- Direct top-mount suspension bracket for upper trolleys
- Standard track stopper with retaining device to resist door bounce back
- Quick and simple low-cost installation
IMPORTANT: Use metric dimensions for greater accuracy during installation.
Cut a groove min. 6 mm x 14 mm at the bottom of the door for the floor guide.
Two-part floor guide 2462041014BL available separately if no groove.
Features:
- Direct top-mount suspension bracket for upper trolleys
- Standard track stopper with retaining device to resist door bounce back
- Quick and simple low-cost installation
IMPORTANT: Use metric dimensions for greater accuracy during installation.
Cut a groove min. 6 mm x 14 mm at the bottom of the door for the floor guide.
Two-part floor guide 2462041014BL available separately if no groove.
TECHNICAL SPECIFICATIONS
Product #
89K08121S
Detailed Door Movement
Single sliding
Roller Position
Upper
Door Installation
Top Hung
Stopper
Two
Adjustable
Yes
Load Capacity
176 lb*
Product type
Hardware Set
Number of Doors
1
Door Width
23 5/8 to 59 in*
Door Thickness
1 3/16 to 1 31/32 in*
Door Height
59 to 118 in*
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
SUGGESTED PRODUCTS
- Running and Guiding Tracks for Sliding Door Systems
- Door Guides for Sliding Door Systems
IMPORTANT INFORMATION
IMPORTANT: Use metric dimensions for greater accuracy during installation.
Cut a groove min. 6 mm x 14 mm at the bottom of the door for the floor guide.
Pictures provided for visual reference only: actual product may vary.
All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantity listed in your order are correct before proceeding to checkout.
Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
The documentation, drawings and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
Installation of the Product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge and experience. Richelieu expressively disclaims any liabilities for results obtained through improper use or installation.
Always remove debris / dust / residue (sawdust and / or aluminum) from the rails using a dry cloth before installing carriage bearings.
Never spray lubricant on this product.
Cut a groove min. 6 mm x 14 mm at the bottom of the door for the floor guide.
Pictures provided for visual reference only: actual product may vary.
All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantity listed in your order are correct before proceeding to checkout.
Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
The documentation, drawings and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
Installation of the Product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge and experience. Richelieu expressively disclaims any liabilities for results obtained through improper use or installation.
Always remove debris / dust / residue (sawdust and / or aluminum) from the rails using a dry cloth before installing carriage bearings.
Never spray lubricant on this product.
DISCLAIMER
By accessing or referring to this document, or by using any of Richelieu's websites, you accept all applicable terms as they apply from time to time. This legal disclaimer is in no way limited or altered by any other terms or conditions. Richelieu may change said terms at its discretion and without prior notice. A version of the most current terms will always be available on Richelieu's website.
The preceding information and technical documentation, information or recommendations issued by Richelieu verbally or in writing is believed to be accurate and is given in good faith, but no representation of warranty as to its completeness or accuracy is made. Suggestions for use or application are only opinions. Users are responsible for determining the suitability of these products for their own particular purpose. No representation of warranty, expressed or implied, is made with respect to information or products including, without limitation, warranties or merchantability, fitness for particular purpose, non-infringement of any third party patent or other intellectual property rights including, without limit, copyright, trademark and designs. Any trademarks identified herein are trademarks of the Richelieu group of companies.
Richelieu assumes no risk and shall not be subject to any liability for damages or loss resulting from the specific use or application made of the product. Richelieu's liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party relating to the product shall not exceed the price paid for said products. In no event shall Richelieu be liable for any special, incidental, or consequential damages (including loss of use, loss of profit, and claims of third parties) however caused, whether by the negligence of Richelieu or otherwise.
Products returned for warranty purposes shall be subject to Richelieu's then applicable Return Policy.
The preceding information and technical documentation, information or recommendations issued by Richelieu verbally or in writing is believed to be accurate and is given in good faith, but no representation of warranty as to its completeness or accuracy is made. Suggestions for use or application are only opinions. Users are responsible for determining the suitability of these products for their own particular purpose. No representation of warranty, expressed or implied, is made with respect to information or products including, without limitation, warranties or merchantability, fitness for particular purpose, non-infringement of any third party patent or other intellectual property rights including, without limit, copyright, trademark and designs. Any trademarks identified herein are trademarks of the Richelieu group of companies.
Richelieu assumes no risk and shall not be subject to any liability for damages or loss resulting from the specific use or application made of the product. Richelieu's liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party relating to the product shall not exceed the price paid for said products. In no event shall Richelieu be liable for any special, incidental, or consequential damages (including loss of use, loss of profit, and claims of third parties) however caused, whether by the negligence of Richelieu or otherwise.
Products returned for warranty purposes shall be subject to Richelieu's then applicable Return Policy.
