TERNO CLASSIC SYNC Hardware Set

Product # 89K01317
Set

Stopper with FLUID shock absorbers

The TERNO CLASSIC SYNC hardware set is designed synchronize two wood doors to slide opposite direction for a weight capacity of 80 kg each.

Features:
- Direct mount suspension plate to the top of the door
- Pulleys with standard stops and retaining device
- Stop with FLUID shock absorbers
- Pulley system with sag resistant cable
- All material sets run on the same tracks
- Simple and flexible installation
- Smooth operating

IMPORTANT: Use metric dimensions for greater accuracy during installation.
Groove is required on the bottom of the door 10 x 20 mm.
Optional two-part floor guide can be purchased separately to avoid cutting a groove

ADVANTAGES AND BENEFITS

- Synchronize two sliding doors
- FLUID shock absorbers
- Pulley system with sag resistant cable

TECHNICAL SPECIFICATIONS

Product #
89K01317
Door Movement
Straight Sliding
Detailed Door Movement
Biparting
Roller Position
Upper
Door Installation
Top Hung
Stopper
Four
Adjustable
Yes
Load Capacity
88.2 to 176 lb*
Roller Type
Ball Bearing
Product type
Hardware Set
Door Material
Wood
Number of Doors
2
Door Width
23 5/8 to 47 1/4 in*
Track Mounting
Ceiling Mount
Door Thickness
1 3/16 to 1 31/32 in*
Door Height
59 to 118 in*
Soft-Close Type
2 Shock Absorber
Application
Standard Access Door
Disclaimer

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.

INCLUDED PRODUCT(S)

- 4 upper wheels with suspension bolts
- 4 direct-mount suspension plates
- 2 stops with FLUID shock absorbers
- 2 pulleys with retaininng device
- 2 cable mounts for the door
- 1 cable
- 2 floor guides
- 1 adjustment tool
- Screws and fasteners for individual components only

IMPORTANT INFORMATION

IMPORTANT: Use metric dimensions for greater accuracy during installation.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.

RELATED DOCUMENTS

DISCLAIMER

Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.