Line art
TERNO STEP FLUID Hardware Set with Shock Absorber
To add to cart, choose from the options below.
Cushion stop
The TERNO STEP FLUID hardware sets with shock absorber stops are designed for one wood door with door weight capacities of 110 lb (50 kg), 176 lb (80 kg), and 264 lb (120 kg) each.
Features:
- Clip-on suspension plate to mount the door without tools
- Stops with FLUID shock absorbers
- Low pull force to open the door
- Minimum door width of 23 5/8 in (600 mm)
- All hardware sets operate on the same tracks
- Simple and flexible direct mount installation
- Smooth operating
IMPORTANT: Use metric dimensions for greater accuracy during installation. Cut a groove 1/4 in (6 mm) x 5/8 in (14 mm) at the bottom of the door for the floor guide.
Features:
- Clip-on suspension plate to mount the door without tools
- Stops with FLUID shock absorbers
- Low pull force to open the door
- Minimum door width of 23 5/8 in (600 mm)
- All hardware sets operate on the same tracks
- Simple and flexible direct mount installation
- Smooth operating
IMPORTANT: Use metric dimensions for greater accuracy during installation. Cut a groove 1/4 in (6 mm) x 5/8 in (14 mm) at the bottom of the door for the floor guide.
Product # | Load Capacity | Door Width |
---|---|---|
89K05092S | 66.1 to 110 lb* | 23 5/8 to 47 1/4 in* |
89K08092S | 112 to 176 lb* | 23 5/8 to 59 in* |
ADVANTAGES AND BENEFITS
- Clip-on suspension plate to mount the door without tools
- Stop with FLUID shock absorbers
- Low pull force to open the door
- Minimum door width of 23 5/8 in (600 mm)
- All hardware sets operate on the same tracks
- Stop with FLUID shock absorbers
- Low pull force to open the door
- Minimum door width of 23 5/8 in (600 mm)
- All hardware sets operate on the same tracks
TECHNICAL SPECIFICATIONS
Door Movement
Straight Sliding
Detailed Door Movement
Single sliding
Roller Position
Upper
Door Installation
Top Hung
Stopper
Two
Manufacturing Material
Nylon, Aluminum, Plastic
Roller Type
Ball Bearing
Product type
Hardware Set
Door Material
Wood
Number of Doors
1
Door Thickness
1 3/16 to 1 31/32 in*
Door Height
9 ft 10 in*
Soft-Closing
No
Soft-Close Type
FLUID
Application
Standard Access Door
Disclaimer
Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.
SUGGESTED PRODUCTS
- Running and Guiding Tracks for Sliding Door Systems
- Sliding Solutions for Architectural Applications
INCLUDED PRODUCT(S)
- 2 upper wheels with suspension bolts
- 2 clip-on suspension plates
- 2 stoppers with shock absorber
- 1 floor guide
- Screws and fasteners for individual components only
- 2 clip-on suspension plates
- 2 stoppers with shock absorber
- 1 floor guide
- Screws and fasteners for individual components only
IMPORTANT INFORMATION
IMPORTANT: Use metric dimensions for greater accuracy during installation. Cut a groove 1/4 in (6 mm) x 5/8 in (14 mm) at the bottom of the door for the floor guide.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.
DISCLAIMER
Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.