B-Moved Motion Transmission Bar
|Product №||Door Installation||Compatible with||Weight Capacity per Door||Door Thickness||Door Width|
|189PS66BEML||Left hand||PS66||20 to 50 kg||25 to 40 mm||600 to 1 000 mm|
|189PS66BEMR||Right hand||PS66||20 to 50 kg||25 to 40 mm||600 to 1 000 mm|
|189BEMTYPA||Left and right hand||PS48 / PS40||30 to 80 kg||18 to 53 mm||900 to 1 400 mm|
|189BEMTYPB||Left and right hand||PS48 / PS40||30 to 80 kg||18 to 53 mm||1 154 to 1 900 mm|
Electric motor for sliding doors
The B-Moved Motion Transmission Bar is an electric motor engineered to move sliding doors for the systems PS40, PS48, and PS66. Select from four types of motion transmission bars. Base your selection first on the compatibility of the sliding system and then on door width. The motion transmission bar mounts within the PS66 sliding mechanisms and to an upper aluminum profile on top of the cabinet and behind the track for the PS40 and PS48 systems. Note to plan for extra depth to fit the motion transmission bar as per the instructions. A connector bracket set connects the PS40 and PS48 to the motion transmission bar. For the PS66, the connector bracket is included.
IMPORTANT: Use metric dimensions for greater accuracy during installation.
- Hardware Sets
- Mounting Accessories
Use metric dimensions for greater accuracy during installation.
Please make sure to read the entirety of the installation manual before proceeding with the installation.
Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
Never spray lubricant on this product.
Do not exceed stated limitations and parameters. This will cause early wear and performance failure.