CS CaviTrack Wall Mount Track Kit

To add to cart, choose from the options below.

Includes fascia and end caps

The CS CaviTrack Wall Mount Track Kit is offered in three popular pre-cut lengths of 72 in (1.8 m), 96 in (2.4 m), and 144 in (3.6 m) for CS sliding door systems.

Features:
- Choose from two anodized finishes: clear or bronze
- Direct wall mount track and clip-on fascia for simple installation
- Includes end caps
- Compatible with M6 and M8 series hardware sets
- Compatible with SofStop series hardware sets
Overall Length: 72 in 96 in 144 in Finish: Clear Anodized Aluminum Bronze Anodized Aluminum Bronze Anodized Aluminum Door Width: Max. 38 in Max. 48 in Max. 72 in Select Options
Product # Overall Length Finish Door Width
TSCTSMNA6 72 in Clear Anodized Aluminum Max. 38 in
TSCTSMNA8 96 in Clear Anodized Aluminum Max. 48 in
TSCTSMNA1210 144 in Clear Anodized Aluminum Max. 72 in
TSCTSMBA6 72 in Bronze Anodized Aluminum Max. 38 in
TSCTSMBA8 96 in Bronze Anodized Aluminum Max. 48 in
TSCTSMBA12135 144 in Bronze Anodized Aluminum Max. 72 in

ADVANTAGES AND BENEFITS

- Choose from two anodized finishes: clear and bronze
- Direct wall mount track and clip-on fascia for simple installation
- Includes matching end caps
- Pre-cut popular lengths

TECHNICAL SPECIFICATIONS

Detailed Door Movement
Single sliding
Track type
Box Track
Compatible with
Cavity Sliders
Door Installation
Side Mount
Running Track Fixing
Surface Mount
Packaging Format
Box
Load Capacity
500 lb
Manufacturing Material
Aluminum
Track Mounting
Wall Mount
Width
2 13/32 in
Door Material
Wood
Door Movement
Straight Sliding
Door Thickness
1 3/8 to 1 3/4 in
Product type
Running and Guiding Tracks
Brand
Cavity Sliders
Overall Height
2 29/32 in
Application
Standard Access Door, Barn Door

INCLUDED PRODUCT(S)

- Wall mount single track
- Clip-on fascia
- 2 end caps

IMPORTANT INFORMATION

- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.

DISCLAIMER

Please make sure to read the entirety of the installation manual before proceeding with the installation. #8 screws and appropriate anchors required for installation (not included). Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection. See instructions for rough opening and other dimensions. Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.

- Pictures provided for visual reference only: actual product may vary.
- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout.
- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.
- The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers.
- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.