Pro Series Robuste Single Flat Track Set

Product # 89TSQ133170

Track set to mount Pro Series Robuste strap mount sliding system

Single flat track set.

IMPORTANT: The minimum door width is 36 in (914 mm) when using a soft-close mechanism, and the maximum door weight is 176 lb (80 kg).
Overall Length: 2 500 mm Finish: Stainless Steel (170) Bronze Bronze Matte Black Matte Black Door Width: 1 170 to 1 250 mm Modify Options
Product # Overall Length Finish Door Width
89TSQ133170 2 500 mm Stainless Steel (170) 1 170 to 1 250 mm
89TSQ632137 2 000 mm Bronze 608 to 1 525 mm
89TSQ04290 2 000 mm Matte Black 608 to 1 525 mm
89TSQ132170 2 000 mm Stainless Steel (170) 608 to 1 525 mm
89TSQ633137 2 500 mm Bronze 1 170 to 1 250 mm
89TSQ04390 2 500 mm Matte Black 1 170 to 1 250 mm
89TSQ634137 3 000 mm Bronze 1 450 to 1 525 mm
89TSQ04490 3 000 mm Matte Black 1 450 to 1 525 mm
89TSQ134170 3 000 mm Stainless Steel (170) 1 450 to 1 525 mm


Product #
Track type
Load Capacity
100 kg
Track Mounting
Wall Mount
Number of Doors
Product type
Single Track


IMPORTANT: The minimum door width is 36 in (914 mm) when using a soft-close mechanism, and the maximum door weight is 176 lb (80 kg).

- Pictures provided for visual reference only: actual product may vary.

- All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantity listed in your order are correct before proceeding to checkout.

- Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice.

- Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge and experience. Richelieu expressively disclaims any liabilities for results obtained through improper use or installation.

- Always remove debris/dust/residues (sawdust and/or aluminum) from the rails using a dry cloth before installing carriage bearings.

- Never spray lubricant.


Each track set includes:

- 1 flat track
- Clamps
- Screws
- Washers
- Hole caps



The preceding information as well as any technical recommendations given in writing, verbally or based on tests are provided to the best of our knowledge. However, they are non-binding recommendations only and do not affect your responsibility to determine the correctness of given recommendations and suitability of the product for your particular purposes. The application, use or processing of our products as well as the production of products based on our technical recommendations are beyond our control and therefore fall exclusively in your area of responsibility. Sales of our products are subject to our most recent General Sales and Delivery Conditions. Please note that Richelieu will not accept any returns or claims for unpackaged products.