RO 82 Clip-on Fascia

Product №: 892505A410
Track Mounting: Wall Mount Ceiling Mount Length: 13 ft 1 in* 78 3/4 in* 9 ft 10 in* Modify Options
Product № Track Mounting Length
892505A410 Wall Mount 13 ft 1 in*
892355A210 Ceiling Mount 78 3/4 in*
892355A310 Ceiling Mount 9 ft 10 in*
892355A410 Ceiling Mount 13 ft 1 in*
892505A210 Wall Mount 78 3/4 in*
892505A310 Wall Mount 9 ft 10 in*


clip on installation

The RO 82 Clip-On Fascia for upper track.

- Silver Anodized finish
- Available in 2000 mm (78 3/4 in), 3000 mm (118 in), and 4000 mm (157 in) lengths
- Choose from two types for ceiling and wall mount applications
- Simple and Flexible installations

IMPORTANT: Use metric dimensions for greater accuracy during installation.


- Decorative cover for track and brackets
- Clip-on installation


Product №
Anodized Aluminum
Compatible with
RO 82
Product type
Door Thickness
23/32 to 1 25/32 in*
Anodized Aluminum
Door Movement
Straight Sliding, Movable Wall
Detailed Door Movement
Single sliding, Bypassing, Biparting

Measures shown with an asterisk (*) have been converted as per your preference. These are not the official measures. To view the measures specified by the manufacturer, click here.


  • Running and Guiding Tracks for Sliding Door Systems
  • Mounting Accessories
  • Sliding Solutions for Architectural Applications
  • Decorative Accessories


1 fascia


- Please make sure to read the entirety of the installation manual before proceeding with the installation.
- Wear safety gear such as gloves, safety glasses, safety shoes, and ear protection.
- Every fastener used to attach the track to the wall must be fastened securely into a structural surface.
- Always remove debris/dust/residues (sawdust and/or aluminum) from all tracks and guide channels using a dry cloth during installation and before operating the system.
- Never spray lubricant on this product.
- Do not exceed stated limitations and parameters. This will cause early wear and performance failure, and will void the warranty.



- Pictures provided for visual reference only: actual product may vary. - All required hardware should be ordered and obtained prior to initiating fabrication or installation work. Please verify that the parts and quantities listed in your order are correct before proceeding to checkout. - Always use instructions provided by the manufacturer, as included with the product. Manufacturer reserves the right to amend, modify, or otherwise supplement any previously issued product and/or technical information, as deemed required from time to time, without prior notice. - The documentation, drawings, and instructions on this page apply to the system described on this page only. Richelieu expressly declines all responsibility for any design or construction that combines this system with systems from this same manufacturer or systems from other manufacturers. - Installation of the product shall be executed by qualified individuals only, always ensuring that each product is securely installed using proper fixation methods, as appropriate for each applicable substratum. We trust that anyone installing these products has the required skills, knowledge, and experience. Richelieu expressly disclaims any liabilities for results obtained through improper use or installation.